JIANGSU SENOLO
Product Description
Cut all kinds of bandages,like plaster bandage,fiberglass casting tape etc.
Introduction:
electric plaster saw is the new generation product designed and researched according to the clinical operation experience. The motor adopts double insulation protection.
Technical Parameters:
1. Input current: 198V-242V, rated input power: 125W;
2. Maximum swing times: 12750-17250 times/min;
3. Swing angle of the plaster saw: 60±10
4. Whole machine weight:575g;
5. Overall dimensions: 260*60*53mm
Usage:
1. During operation, hold the saw firmly, lay it on the cut plaster slowly and cut the plaster perpendicularly. Don't cut it through once if you are not sure (although the saw has soft tissue protection function).
2. Cut the plaster perpendicularly, lift it and move forward, lay it on the lower cut section slowly, repeat the above course until finishing the task.
3. When the saw teeth are obtunded after a long time of use, loosen the cap and rotate the saw blade counter clockwise with a 5mm socket hexagonal wrench, then tighten it clockwise.
Certifications
ISO FDACE
Factory & Storage
Visit & Exhibition
Hot product
Crepe Bandage
Tubular bandage
self-Adhesive Bandage
orthopedic casting tape
Orthopedic splint
TPE Disposable Tourniquet
Contact us
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine.