Lead Free Reflow Oven With 8 Heating Zones SMT Reflow Oven ZM800

Lead Free Reflow Oven With 8 Heating Zones SMT Reflow Oven ZM800
Model
ZM800
Control
Industrial computer
Heatingzones qty.
Top 8, bottom 8
Cooling zones qty.
Top 3, bottom 3
Heatingzone length
3110mm
Rectifying plate
Thick copper plate
Weight
Approx:2400kg
Dimension
5520*1430*1530mm
Exhaustcapacity
11m2/minx2
Color
Grey
Electricity supply
3P 380V/220V 50/60HZ
Temp. control range
Room temp.~300℃
Total power
64KW
Temp. control accuracy
±1℃(static state)
Start power
30KW
Temp. control method
Closed loop, PID +SSR
Consumption power
9KW
PCB temperature deviation
±1.5℃
Speed control
3 Inverters adjust
Data save
All profiles can be saved
Warm up time
Apprx.30minute
Abnormal alarm
High, low temp. alarm
Rail structure
2 segments rails
Rail fixed method
Front fix
Chain structure
Stainless steel, stuck-free type
Conveying height
900±20mm
PCB Max. width
50-460mm
Conveying method
Chain+ mesh+ rail
Component height
Top/bottom 30mm
Conveying speed
300-2000mm
Conveying direction
Left to right
Lubrication
Automatic
Max. temp. difference between preheat zone and soldering zone: 90 ℃
Max. temp. difference between preheat zone: 50 ℃
Max. temp. difference between solder zone: 50 ℃
Cooling method
Forced air cooling
Heatingzones
Top 8,bottom 8(3110mm)can meet the need of the peak lead-free technique.
Coolingzones
After cool down by forced air, PCB temp. is Less than 70℃at the exit.
Warm uptime
From the normal temp. to set temp, approximate 30 minutes.
Warm upsequence
Warm up from two side, save the power and time
Profiletransfer time
<15min
Heatingzone temp. control accuracy
±1℃
PCB temp.deviation
±1℃
Empty to fullload heat balance respond time
Less than 20 s
Heatingzones separately close function
Every heating zone can be closed separately on computer. When thebottom heating zones are closed, the PCB two sides temp. different reachesmax.(PCB of different material, thickness, size, the temp. difference valueis different.)
Hot air motor
import anti high temperature motor,RPM:3200rpm.Adopts inverter to control, can adjust thespeed of motor from 0 to 3200, stepless. Motor warranty is 5 years.
Heater
The heater is specially made, with high efficiency and sensitivity,warranty time is 5 years.
Air lane structure
High efficient air lane, provides abundant air
Exhaust system
Forced exhaust device, ensure no escape of flux.
Anti torque rail
High strength and hardened rail, is very durable and wear resistant.
Rail parallelism
±0.3mm
Chain stretch out length
Standard: 5mm, the chain is anti-stuck type, solve the solderingproblem of small PCB
C/V speed set min.unit range
0.01m/min, 0~2m/min
C/V speed deviation range
Computer close loop, within ±2%
Chain tension device
Automatic adjust by spring, avoid the chain stuck due to the heating.
Conveying motor
Panasonic adjustable motor
Chain lubrication
The lubrication is controlled by PC, lubrication cycle and time can beset(there are three modes: fine, standard,economical. There is also manual lubrication in software)
Rail width-adjusting
Independent motorized adjusting
Mesh
500mm stainless steel mesh,runs synchronized with chain