China Grout Injection Packer Cement Crack Seal

Product Description
China Grout Injection Packer Cement Crack Seal

China Grout Injection Packer Cement Crack Seal

Injection Packers Model Specification(diameter*length)
13mm x 80mm
13mm x 100mm
13mm x 150mm
13mm x 200mm
13mm x 250mm
13mm x 300mm
10mm x 80mm
10mm x 100mm
10mm x 150mm



Installations
China Grout Injection Packer Cement Crack Seal
1.Crack and leakage condition inspection Check the process procedure after finding the thickness, width and depth of crack and leakage condition of the structure
2.Drilling Operation Drill directly into crack section if the thickness of concrete is thinner than 10cm. For the thickness of 10~50cm, drill it with 45 degree angle by keeping a distance of 1/5 of concrete thickness. Make sure it penetrates the crack section. If the thickness is over than 50cm, keep the distance of 20~30cm and drill it with 45 degree angle until it penetrates crack section. And keep drilling by maintaining the fixed interval. (5 holes per 1 meter. Drill it in zigzags)
3.Packer Installation Clean the inside of drilled holes with compressor. Make sure that rubber sleeve of packer and cutting line of tightening nut should be put into the inside of concrete surface when installing. Tighten the packer completely by using the T-box. (Packer might be damaged if you tighten it too strongly)
4.Injection Operation Inject the waterstopping material by using the high pressure device or grease gun. Maintain the initial injection pressure as around 40kg/cm and increase the pressure by each 10kg/cm gradually until the waterstopping material flows out from crack section. Water will come out from the crack section first and then waterstopping foaming agent and then water stopping liquid at last. If the waterstopping material that is not foamed comes from the crack section, then move to next packer for injection.
5.Packer Removing Operation Remove and break the packer by using vise pliers or hammer as a tool. If there is still a wet section, then inject the water stopping material again.
6.Finishing Operation Remove the water stopping material that is remained on the crack section. Spreading with the elastic sealing material
Related Products
Item-500 grout injection pump
91.8% Response Rate
Item-800 Double injection Pump
91.8% Response Rate
Aluminum injection packer
91.8% Response Rate
Packing & Delivery
China Grout Injection Packer Cement Crack Seal
1.Packed in cartons
1500 pieces per master carton
Carton Size: 32*32*21cm
Weight: 20 KGS
2. Cartons in Pallet
If you need them packed in pallet to avoid damage, we will design pallet size as per the carton sizes.



Company Profile
Found in 2006, Shanghai NSJ Hardware Ltd. main products lines:
1. Two-component Cartridges
2. Full range static mixers for Two-component Cartridges
3. High Quality Two-component Caulking guns
4. Customized Filling machine
5. Single series cartridge and gun
6. Blow pump, plastic or metal brushes.
7. Other customized products

China Grout Injection Packer Cement Crack Seal

NSJ products involve to Dental, Anchoring, Bonding, Coating and Automotive sealing and other field by full range of sizes, which is the most in China and developing continuously.



FAQ
China Grout Injection Packer Cement Crack Seal

Q1: Can I have a sample for testing?
A: Since all is standard size, we do not suggest to buy samples and pay high shipping charges. We supply free samples for plastic cartridge, static mixers, but guns samples are 20% higher than regular order.
Q2: Can I print my logo on the product?
A: Yes,OEM and ODM are available for us.
But you should send us the Trademark authorization letter.Q3: How can I get the after-service?
A: We will send you the spare parts by free if the problems caused by us.
If it is the men-made problems, we also send the spare parts, but you should pay.Q4: Do you have inspection?
A: 100% self-inspection before packing and also 100% force test.Q5: Can we customize our perferred colors
A: Yes, if the items are meet QTY 100units.Q6: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.
Add.: 1118 Huateng Rd, Huaxin Town, Qingpu District, Shanghai, China
Our factory is near Hongqiao Airport. We can pick you up in the airport.
Hotel booking service is available.
Welcome to inquiry!!

Contact Us