Related product
Product Description
The oil gear flowmeter designed of the product control panel, with a full-featured, simple structure, convenient operation. Can be widely used in petroleum, chemical, pharmaceutical, transportation, food to be industrial and commercial. Screen digital LCD monitor, the screen is divided into three rows: the top row as significant units of measurement, the middle row was deemed current measurement data, the next line as significant single cumulative data.
The Principle:
1) Oil flowmeter installed in the oil port side of the pump, if installed in the oil inlet filter pressure damage, so that the negative pressure pump increases, the flowmeter is not accurate, the pump import and export also require completely sealed, otherwise it would not be accurate flowmeter.
2) At the front end of the meter should be installed filters, not greater than 0.2MM of particles through, in order to prevent the meter because the particles do not go face stuck or blocked. Filters should be cleaned regularly.
3) The flow rate should be properly installed, the meter was up screen should be 90 degrees or installation, you can not install diagonally.
4) The Oil gear flowmeter and the pressure loss is proportional to the viscosity of the liquid increases, the pressure loss is also increased.
Main parameters
ModelCX-OGMMediumDiesel,fuel,oilSize1'',1.5'',2'' inchFlow Range20~300 L/hAccuracy+/-0.5%Max pressure 3.4Mpa with low pressure dropDisplayLocal LCD DisplayMax viscosity1000CpsTemperature-40~80COutputPulse OutputFunctionwith reset but without filterConnection female thread connectionweight4kgDiameter35*30*30cm
Technology
1.The oil flowmeter with lcd display and display the liter,amount,pirce.and with three keys.
2.The oil gear flowmeter inside view.the gear and seal.
3.The oil flowmeter structure.
Products View
Company Information