Plank For Ringlock System Scaffolding Material China Supplier Exporter Scaffolding

seline; color: #006600;">1.Our product:
-----------------------------------------------------------
seline; color: #006600;">2.Product Description:
-----------------------------------------------------------3.Packing and Delivery:
-----------------------------------------------------------4.Our Factory:
-----------------------------------------------------------
Material:
1, Covering Panel: 4mm clear solid PC sheet. Good impact resistance.PC Solid Sheet has excellent impact resistance, it is 250 times higher than conventional glass, 30 times higher than the acrylic sheet. Solid sheet of impact strength are "transparent plate"
Panel color: clear, opal, green, blue, brown, frosted and so on.
2, frame: 6063-T5 Aluminum Alloy
The mean value of reliability analysis of aluminum alloy structural members are over 3.7
The surface of aluminum alloy is powder coated with colors like white, black, creamy, gray, and green.
3, Sliding Track System
Slip resistant and meant to step on in bare feet. The ground rails are made from tabular aluminum sections, so there are no sharp exposed edges. Ground rails can be attached to even surfaces, horizontally or vertically on the walls of buildings.
The number of tracks on the ground rails corresponds to the number of segments making up the swimming pool enclosure.
Slip resistant and meant to step on in bare feet.
4, Hardware & Fasteners
We use stainless steel and aluminum hardware and fasteners throughout the entire enclosure.
5, Dustproof keeping pool clean
To seal the upper space between the adjacent segments we use EPDM material.
Anti-dust flap installed on the bottom edge of the gable ends to prevent dust and leaves coming into the pool from this part.
6, Extreme Wind and Snow
A docking system made of stainless steel A2 plates (fixed to the lower aluminum profiles of the segments) and “Docking Stop” element (fixed to the ground) provides added protection.
7, Requirements in High Wind and Snow
During high wind and snow conditions the enclosure must remain in a fully compressed position. End panels must be properly secured to the ground surface, with doors closed and locked. All sections must be locked to the track with Safe Grip Track System. Removal of excessive snow from the roof and sides of the enclosure is mandatory.