Products Description
Operation method
3.Open the package, immerse the bandage in room temperature water for 2-3 seconds and squeeze 2-3 times at the same time to make the bandage fully soaked. Squeeze out excess water after removing.
4.Spiral wound around the affected part, each layer overlapping 1/2-2/3.Tightness should be appropriate, if too loose adhesive force between the layers will affect its strength, too tight will affect the blood circulation of the affected limb.The strength of the bandage is related to the number of overlapping layers. The non-supporting parts have 3-4 layers and the supporting parts have 5-6
layers.
5.After winding, the body should be shaped in turn to ensure the bonding between the layers and the limb.
6.The operation is generally completed in 3 minutes,3-5 minutes to start curing,10 minutes after the functional strength.
Matters needing attention
* The doctor wears gloves and a cotton cover over the affected area to prevent polyurethane adhesive from sticking to the skin* Use immediately after opening and shape, do not open multiple rolls/bags at the same time* Suitable water temperature is required for the curing of bandages and splints. If the water temperature is high, the curing time
will be short; if the water temperature is high, the curing time will be long; if the water temperature is too high or too low,
the curing effect will be affected* If soaking or operation time is prolonged, it will affect the adhesion between the bandages and the shaping effect* During treatment, the patient is advised not to wet the bandage as much as possible to avoid skin discomfort* An electric plaster saw is used when the bandage is removed, and the splint is simply removed from the bandage
Certifications
Shipping and Packing