Rotary Evaporator 50l Vacuum Rotary Evaporator Laboratory Industrial

Product DescriptionApplicationRotary Evaporator is a laboratory common equipment which composed of motor, distilling flask, heating
bath, condenser, receiving flask and so on. It's mainly used in chemical laboratories for the efficient and
gentle removal of solvents from samples by evaporation. Rotary Evaporators are also used in molecular
cooking for the preparation of distillates and extracts. It's the ideal tools for lab applications, such as:
• Concentration of solutions;• Reclamation of solvents; • Vacuum drying of wet solids;
• Essential oil extractor; • Efficient and gentle removal of solvents from samples.Mainly used in Pharmaceutical, Biotechnology, Chemistry, Food Industry and laboratory, ect.
Technical DataModelRE-1050 Rotary Evaporator
Electrical Requirements220V 50/60Hz single phase, 29A,Rotation Power: 250W Heating Bath: 6000WGlass MaterialHigh borosilicate glass 3.3
Evaporating FlaskCapacity: 13.2gallon (50Liters or 1.8cuft)Maximum load: Not to exceed 60% of the flask's capacitySealing flange: 4.9'' diameterRotation speed: 20-90rpm Evaporating speed: 3gallon/hour(water), 6gallon/hour(alcohol)Receiving Flask1x5.28 gallon (20Liters or 0.7cuft)
CondenserMain Condenser+auxiliary-circulating cold traps, verticalChilling fluid connection:3/8'' hose barbCondensing surfaceMain condenser:11,500cm2 or 12.4sqftAuxiliary condenser:4,000cm2 or 4.3sqft
Heating BathTemperature range: Water: Ambient to 99℃(210℉); Oil: Ambient to 200℃(392℉)Temperature controller: LED Digital DisplayDimensions:φ540XH310mm orφ1.77ft X H1.02ftMaterial: 304 Stainless SteelMedia: Distilled water or OilMax. Water level: Not to exceed 1'' from the top rim of the bathNumber of heaters: threeDrain port: oneLifting: Electric LiftMaximum lifting distance: 200mm (7.9in)VacuumUltimate vacuum level: <3torrsSealing: PTFE + Viton GasketsConnection:3/8'' hose barbSafetyDry-run, over-temp shut-off, built-in circuit breakersFeaturesBumping Tube
Preventing unexpected solution bumping into receiving flaskAuto-shift Valve
Working while discharging, and
not affect whole system vacuum,
can be a long continuous work.
LED Big Viewing Window
Cant control panel design, easy
to observe, easy to operate and accurate temperature controlPTFE Discharge Valve
Corrosion resistance, no pollution
high sealing performance.
Electric Lift Heating BathSS304 Stainless steel heatingbath with discharge valve,rustprotection.High Efficient Condenser
Main condenser+assistant condenser, large cooling area.
Lab SolutionSome problem often occurs when first time use the rotary evaporator to evaporatesthe solvent.
☹ Slow evaporation rate
☹ Low receiving rate while evaporating is good
☹ Vacuum pump being corroded
☹ Sudden slovent bumping
☹ Harmful gas spill
☹ Sealing component being corrodedHow to solve these question?
The chiller can let the vapor rapid condensation and recovery, reduce wasting and improve the working
efficiency; The vacuum pump can reduce the boiling point to increase the evaporation rate, also can let
more vapor are full of all condenser, so that the chiller has a better cooling effect.


We can give the best lab solution for you.
Packing & ShippingPACKING


-Export wood case
-The interior glass fittings are packaged with molds.


-Packing size:

1180x650x1540mm

G.W: 145kg
SHIPPING

-Shipping by air, by sea, by train or by express.


-Youcanchoosetheappropriateonebasedon
yourtimelineandbudget.


-You can choose to use your own forwarder.
Our Service1. The period, scope and condition of the warranty.
①We offer 1 years warranty. During the warranty time, because of manufacturing&quality problem,
we offer replacement, maintenance service.

②The damage caused by the transportation problem shall be borne by the seller.2. How to solve the problem of your equipment?
Pleasesendusemailoftheproblem,picturesorasmallvideowillbemuchbetter. wewill findthe
problemandtellyouhowto solveit.Ifthereisabroken,wewillsendyouanew part,anditisfree
inthewarrantyperiod.
3.How to shipping the replacement parts?We will according the actual situation to choose the suitable shipping ways. For small parts we shipping by Express.
4. Couldyoudo customized forus?
We are a manufacturer that can provide all kinds of customized services.

Insulator Cradle

With Two Receiving Flask
Ex-proof SystemOur Company
Shanghai Yuhua Instrument Equipment Co., Ltd is the professional manufacturer, was
established in 2008, in Shanghai, China, with more than 10 years development, we accumulated rich customer groups and huge amount of product application experiences. With rich experience and feedback from customers, we have manufactured series equipment, and widely used in Laboratory, Medical and other Pilot Plant.
Our main products are Rotary Evaporator, Glass Reactor, and its related Heating and Cooling Circulators.
Business License and Product CE Certificate
Our Factory and ExhibitionContact UsShanghaI Yuhua Instrument Equipment Co.,Ltd.

Website: Http://shyhyy.en.alibaba.com
Contact: Jimmy
Email:hao@shyhyy.com
Phone: (+86)15695515213
Address: No. 321-1, Chungui Road, Huangdu
Industrial Park, Shanghai City, China.