ATNJ New Smart LTE 4G mobile signal repeater 800mhz cell phone signal booster LTE 4g amplifier

Product Description
Global application ATNJ factory LTE 800MHZ 4G signal repeater 4 colors for your selection:
LTE 800MHZPico repeater is applied specifically in small area indoor DAS system. The base station signal is coupled and amplified by Pico repeater into in building system. The amplified signals is transmitted by indoor antenna. Meanwhile the indoor antenna receives the cell phone signal, and send the signal to the base station as uplink. This method can eliminate the signal dead spot, reject the interference, provide the stable signal communication for cell phone users. This Pico repeater mainly solves the problem spot problem in building. The coverage area is as large as 3000 square meters in open space, and 1000 square meters in partial obstacle area, 500 square meters in complete obstacle area. The edge power level for coverage area is above 85dBm. The repeater output power level is less than 20dBm.
Pico Repeater is a bi-directional amplifier that allows for the reception of signals, amplifies the signal and re-transmits into areas where there is no or very low signal level coverage enabling a mobile user to establish a call connection.
Pico Repeater can be deployed in indoor coverage and dead area. It is especially advantageous to use in 100M2-1000M2,which is a very economical solution. The output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.Packaging & Shipping
1,GSM900 BOOSTER x1
2,POWER ADAPTERx1
3,STICK ANTENNAx1
4,PENHOLDER ANTENNAx1
5,16M CABLEx1
6,MOUNTING ACCESSORIESTechnical spec.
CDMA/GSM 800MHZ
PCS1900MHZ
GSM900 MHZ
DCS1800 MHZ
3G2100MHZ
UL791-821MHz
DL832-862MHz
UL1850-1910MHz
DL1930-1990MHz
UL890-915MHZ
DL935-960MHZ
UL1710-1785MHZ
DL1805-1880MHZ
UL1920-1980MHZ
DL2110-2170MHZ
Gain
70dB
Automatic Gain Control( AGC)
30dBm
Noise Figure
4dB
Gain Flatness
5dB (p-p),
Automatic Gain Control (1dB step)
30dB in step of 1dB (Auto)
Maximum Output Power
UL:10-20dBm DL:15-27dBm
Input power range
-55 dBm~-15 dBm
Intermodulation Products
9KHz~1GHz
-36dBm @ 3KHz
1GHz~12.75GHz
-30dBm @ 3KHz
Spurious Emission
9KHz~1GHz
-36dBm @ 3KHz
1GHz~12.75GHz
-30dBm @ 3KHz
Group Delay
UL:1μs
AC POWER
AC 95-250V
Adapter output power
DC5.0V
Temperature range
-25℃~+55℃
Relative humidity
<80%
RF interface
SMA-F
Power interface
KLD-35-13
Weight
≤0.3kg
Size
160x100x17mmFunctions

1,Intelligent to guide the installation with LCD
2,Real time display the signal strength.
3,Automatic dormancy when no user make the calling
4,initiative reminding when device damaged
5,Automatic detect the installation mistake and provide the corresponding solution with LCDDetailed Images