Product Description
Chevron conveyor belts
Chevron conveyor belts are used on slope angles up to approx. 30º for slightly rolling materials such as gravel and coal and up to approx. 40º for sticky materials such as wet sand and earth.
Property
-- For steep angle conveying with incline less than 45º
-- Allows the use of smaller pulley diameters.
-- Cleat height range from 5mm to 25mm which is suitable to convey bulk material up to 80mm lump size.
Property
-- Available in several high quality covers including abrasion, heat, fire, oil and fat resistant.
-- Chevron conveyor belts widths range from 400 up to 1200 mm
Property
-- The cleats are moulded and vulcanized in one single process together with the base belt of patterned conveyor belts.
Specification
Mould No.
CH
mm
CP
mm
CW
mm
BW
mm
C5P230
5
230
260
360-1000
C5P230
5
230
300
400-1000
You may like
Conveyor belt fastener
140E,190E, 1.5" 2",2.5"
packed in carton box
Conveyor belt vulcanizing machine
Suitable for belt width upto 2600mm
Suitable for both fabric and steel cord belt
Smooth conveyor belt
EP400/3,EP500/4,EP630/3
Belt width from 100mm to 2600mm
Belt thickness: from 3mm to 50mm
MOQ:5m
Sidewall conveyor belt
EP400/3,EP500/4,EP630/3
Sidewall height: from 40mm to 400mm
Cleat height: from 35m to 350mm
MOQ:5m
High quality wrapped V belt
O,Z,M,A,B,C,D,E
SPZ,SPA,SPB,SPC,
3V,5V,8V,3L,4L,5L
MOQ: 50pcs
Raw edge cogged V belt
AX,BX,CX,XPZ,XPA,XPB,XPC
AX10X,AV13X,AV15X,AV17X,AV22X
3VX,5VX,8VX
MOQ:50pcs
Quality control
Step 1: Raw material inspection
Rubber compound test
Moving die rheometer analyzes the characteristics of Rubber Compound
EP fabric test
Tensile strength test and elongation test when broken.
Step 2: Advance equipment to guarantee quality from the details
Calender process
4 rollers celender machine is able to stick rubber on both side of the fabric in one time.This can reduce the strength loss of the rubber during the process.
Forming process
The forming tension is even between different plies,which can avoid wrinkled fabric and guarantee an even thickness of belt core.
Step 3:Finished belts inspection
We have an inspection team to inspect the surface and dimension of each conveyor belt. If any problem on belt surface, we will repair at once in our factory.
Length and surface inspection
Thickness inspection
WIdth inspection
Step 4: Technical data test
We have a lab to test all raw materials and rubber compound.For each roll of conveyor belt,the lab will test the following features, and issue Quality Test Report.
FAQ
Q1. Are you a manufactuer?
Yes, we mainly produce Rubber conveyor belts and Rubber v belts over 20 years.
Q2. What about the lead time?
1) 3--5 days for sample
2) 15--20 days for mass production. If urgent,we have green channel
Q3. How to pay?
1) T/T or L/C through bank account
2) Select Alibaba Trade Assurance Service
Q4. How about package?
1) Inner is packed on round rubber core with 30cm diameter and 12cmx12cm square hole
2) Outer is packed with one ply water-proof PP fabric