Fire Alarm Smoke Detector

Power SourceDC 9V External batteryQuiescent Current<=8uAAlarm Sensitivity0.09-0.15dB/mComply with standardEN 14604:2005/AC:2008Alarm Current<=16mAAlarm Volume>85dB(A) @ 3 metersLow Voltage Threshold<=7.5VHush time10minutesProduct service life>10 yearsSize100.8mm in diameter x 36.7mm depth
Product description:
The unit is a photoelectric smoke alarm device. With the photoelectric technology, it is more sensitive to detecting slow smolder fires which general thick, black smoke and may smolder for hours before bursting into flames. The smoke alarm device does not contain the radioactive material which is harmless to the environment.
A DC 9V External battery and warns you when the battery is low
In order not to disturb your rest, Some products designed function of silence.
With the increase of working time,the alarm detection signal will be decayed, when attenuate to the certain value, the alarm will send a fault signal, you must replace the productimmediately.
Product design of the test function by pressing the test button, used to test the product is working normal. A weekly test one times is required.
Product main feature:
Ÿ Photoelectric smoke alarm device;
Ÿ Certificationtestfor EN 14604:2005/AC:2008;
Ÿ Low-Power feature, There are three types of batteries
1.External one Alkaline Type battery(type:6LR61 or MN1604 or GP1604A);
2.Five years product design life and EOL(End-of-Life) warning;
3.External one carbon Type battery(GP1604S);
One years product design life and EOL(End-of-Life) warning;
Details of the product function:
Standby mode: after the product is installed, if the smoke alarm device is operating properly, the red LED-Flashing once every 32 seconds;
Alarm mode: when the smoke alarm device detect particles of combustion and the concentration of smoke reaches the alarm threshold, the red LED will flash once per second with pulsating alarm until the smoke is disappeared.
Low battery mode: when the battery voltage is low than threshold, an intermittent “chirp” with red LED flashes once every 42 seconds;
Fault mode: if the alarm detection signal decays to below threshold, the alarm chirp occurs without LED flashes every 32 seconds.
Silence mode: press the test button at least 2 seconds, it will go into silence mode for approx 10 minutes. That will desensitize the alarm sensitivity temporarily. At this time, the red LED will flash once every 10 seconds;
Test mode: test the unit to ensure proper operation by pressing the test button. At this time, the red LED will flash once per second with pulsating alarm until test button is released.
NOTE: WEEKLY TESTING ONE TIMES IS REQUIRED.FAQ
Q:Do you offer OEM/ODM service?
A:Yes,exactly.We provide OEM/ODM service.
Q:Can I have my logo printed?
A:Yes, we’ll do as you request.
Q:What'syourdeliverytime?
A:ForthefirsttimeofOEMorder,weneedto30-50daysaccordingtotheorderdetails.
Q:Whataboutthepaymentterm?
A:30%inadvance,balancedepends onthecopyofB/L.ByT/TorL/C.