Woodworking furniture machine automatic feeding computer CNC Panel Saw1. The machine bodies assemble on steel frame. In order to make stable of structure to avoid deformation of body, bleach stress, high temperature annealing,concussion sandblast and antirust. Those processing jobs are step by step and never lost one of those.
2.Leveling pad pieces are under the machine’s leveling screws.
3. A dust suction tubular pass through underneath machine body.
4. There are two 90° angle fence between cut line and can be adjusted.
The saw carriage rails are basically on double parallelism hardened round rod.
1.The material of hardened round rods use bearing steel.
2.The saw carriage structure assemble with ironframe and 8 copper wheels travel on double
parallelism hardened round rod.
3.The saw carriage travel with 2HP inverter motor and adjustable steel cable system.
4. This machine is basically transmitted with timing belt on 15HP main saw blade motor to carry on
scoring saw blade spindle.
5. The saw carriage forward speed (5~45 M/min) can be adjusted with knob on control panel and return speed 70 M/min.
6. The saw carriage mid-way return use optical fiber to detect by program setting.
7. Main saw blade raise up with pneumatic aircylinder together carry on scoring Saw blade and raise up height to maximum cutting in every time.8. Main saw blade maximum projection 105mm dis-adjustable.
9. Scoring saw blade manual adjust up-down and left-right with hook spanner.
10. Main and scoring locked by 38mm and 19mm wrenches.
Working Process
This machine is fully automatic: user just needs to input the data concerning workpiece thickness, length, width and required width, then the machine will take the workpiece into the machine by clamp hand, thus it will calculate how many pieces to cut and then start operation. After finish cutting, it will push the ready ones out, which enable user to carry them out. There is air sprayed out from the holes on worktable surface, thus user can easily carry the heavy board without burden.