Automatic Nail Making Machine factory

Product Description
Automatic Nail Making Machine factory
Product Description
1.Long service life,no less than the traditional common nail making machine, for at least seven years.White belt at low cost and long life which is 5-6 months without an incorrect operation.

2.Automatic oiling , few lubrication points,much less than traditional machines and other nail making machines on market.It is still very tidy when operating.

3.High Production. Set specification 2550 as an example,about 750 kg / 8 hours.

4.No dismantle if not change nail mold specifications which can work for 3 months. Nail cutter 60 classes (8 hours / day, 2.5 wire diameter). Punch time is five times than ordinary equipment depending on the actual using status.

5.Nail cutter do cutting without touch, shear number can reach at least 800 million times (8,000,000 is the cutting times of wire diameter 2.0mm, rough wire diameter will multiplied);low consumption of nail mold, no crack, no fixed mold raw wear, no mold clogging, a single pair of nail mold can cut at least 50 million times, punching is more than 25 million times. Nail cutter, nail mold, punch can be repaired for many times at the same cost compared with general equipment.

6.Super energy-saving: actual consumption of High- speed nail making machine is about 3.5KW,1 ton nail output can save electricity about 20 degrees; while 2.5 sets of ordinary nail making machine consumption is 5-6KW due to long slide stroke and multi sliding friction parts

7. 60% labor saving because of its high efficiency. Coiling nails efficiency gains at least 50% with a high-frequency welding machine as each nail is quality product without stuck and stop, even if in the speed of 1900 nails/min, coiling speed can improve 30%, so that can reduce 40% labor cost.

MODEL
SSS-YH-ZDJ-X50
SSS-YH-ZDJ-X90
SSS-YH-ZDJ-D90
SSS-YH-ZDJ-X130
SSS-YH-ZDJ-X150
Nail dia.
1.8-3.0 mm
2.0-3.8 mm
2.0-3.5 mm
2.4-3.8mm
2.5-4.8 mm
Nail le.
30-55 mm
30-90 mm
45-90 mm
50-130 mm
70-150 mm
Speed
≤ 800 pcs/min
≤760pcs/min
≤680pcs/min
≤680pcs/min
≤700pcs/min
Power
7kw
7kw
7kw
7kw
14kw
Dim (mm)
1350*850*1170
1500*800*1600
1350*1220*1050
1500*800*1600
1350*1220*1050
1500*800*1600
1550*1220*1050
1500*800*1600
1650*1250*1300
1500*800*1600
Weight
2200 kgs
2800 kgs
3000 kgs
3500 kgs
4500 kgs
The machine's main characteristics are as following:
Automatic Nail Making Machine factory

1.Shorter stroke (12mm), traditional machine around 100mm

a.Stable performance, defective rate less than 1/100000
b.Lower mechanical wear
c.Gripping dies and punches are more durable.
2.The nail length can be well controlled.
a.The machine equipped with sensor for detecting longer or shorter nails
b.Active wire feeding, can ensure straight shank and consistent length, no matter what the wire coil's weight is.
3.metal scraps can be separated with nails very well
a.Effectively protect the nail conveying belt
b.Ensure the good shape nail head
Unique Features
Automatic Nail Making Machine factory

1) Dual-mode double-punch
2)Nail blade holder uses the pendulum structure
3) Feeding and rewinding structureCertifications
Detailed Images
Name: Nail blade holder
uses the pendulum structure:

①Short distance,low mechanical wear
②High precision, nail cutter works without touch, low tool wear.
③More than 10 million times of single-blade shear, more time-saving and labor saving.

Name: Dual-mode double-punch
①Nail head can be punched well even the shank is uneven.
②Big nail head.
③Nail head with out knock marks to ensure consistency.
④Uniform thickness of the nail cap diameter.
⑤Hollow design nail die,no small head,no ash blacking,no clip crumbs,no cracking,no frequent dies demolition.

Name: Feeding and rewinding structure
①High - precision feeding device. The error of each nail length is controlled within 0.3mm
②Unique wire feeding and retreating combination, each nail through the wire feeding, cutting, wire retreating, three mechanical action, the nail will be completely separated from the nail shank to ensure quality.



Automatic Nail Making Machine factory

Name:1) Installation Tool Box
2)Belt.
3)Nail Making Dies.




Automatic Nail Making Machine factory
Our Company
COMPANY INFORMATION

SSS HARDWARE INDUSTRY CO.,LTD was founded in 2005,specializes in nail making machine ,high speed nail making machine, wire collating machine,thread rolling machine, ,nail polishing machine,wire drawing machine,Staple Nail Making Machine and related products such as nail,staples,welding wires,thread rods,pneumatic tools,building hardwares. Our factory covers an area of 60000 square meters and owns 300 sets of equipment.We are supported by seven branch work plants to ensure our good quality and prompt delivery.
Quality is our priority and your satisfaction is what we are striving for.Our products are very-&popular in Germany,France,Italy,UK,Turkey,Poland,Slovenia,Bulgaria,Belarus,Serbia,Russia,Canada,America,Mexico,Brazil,
Argentina,Vietnam&Korea.You can totally rest assured of our guaranteed quality and our good after-sales service.

CUSTOMER VISITING:
Automatic Nail Making Machine factory

Our Service
Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
After-Sales Service

* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.Packing & Delivery
Packaging
Size
2000*1050*1100mm
Weight
2800kg






Packaging Details
The normal package is wooden box. If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.Related ProductsContact Us
Automatic Nail Making Machine factory