High speed wire nail making machine

High speed wire nail making machine
Product Description
Main introduction:
1. Long-service life, no less than the common nail making machine, for at least seven years. White belt at low cost and long life which is 5-6 months without an incorrect operation.4. Low Maintenance cost, no dismantle if not change nail mold specifications which can work for 3 months. Punch time is five times than ordinary equipment depending on the actual using status.
The upper and lower nail cutters do cutting without touch, cutting times can reach at least 8 million (8,000,000 is the cutting times of wire diameter 2.0mm, rough wire diameter will be multiplied); low consumption of nail molds, no crack, no fixed mold raw wear, no mold clogging, a single pair of nail mold can cut at least 50 million times, punching is more than 25 million times. Nail cutter, nail mold, punch can be repaired for many times at the same cost compared with general equipment.
5. Super energy-saving: actual power consumption of High- speed nail making machine is around 3.5KW. Compared to the normal nail making machine, this machine can save electricity around 30 degrees per 1 ton nails output.
6. Easy operation and high efficient: one person can operate at least 6 machines at the same time. 60% labor cost saving because of its high efficiency. Coiling nails efficiency gains at least 50% with a high-frequency welding machine as each nail is quality product without stuck and stop, even if in the speed of 1900 nails/min, coiling speed can improve 30%, so that can reduce 40% labor cost.
7. High quality nails: Detective rate is very low, which is 1/100000, improve the efficiency of coil nail collating and paper strip nail making machine, far different from traditional nail making machine which detective rate is high (3%) and hard to control.
Unique patent, double-punch
Double-dies, double-punch
Nail head can be punched well even the shank is uneven.
Big nail head.
Nail head without knock marks to ensure consistency.
Consistent nail head.
Hollow design nail die, no small head, no ash blacking, no clip crumbs, no cracking, no frequent dies demolitionMore than 10 million times of single-blade shear, more time-saving and labor saving
SPECIFICATIONS FOR 25 TON CRAWLER EXCAVATOR
NO.
ITEM
UNITS
PARAMETERS
1
Nail Maximum Diameter
mm
3.5
2
Nail Minimum Diameter
mm
2.0
3
Nail Maximum Length
mm
80
4
Nail Minimum Length
mm
32
5
Speed
pcs/min
≤760
6
Power
kw
7
7
External dimensions
mm
2000*1050*1100
8
Weight
kg
2800
Packing & Delivery
Certificate
Our Service
Pre-saleAfter-sale
Our Company
Contact US
High speed wire nail making machine
FAQ
1. Time for changing nail sizes
----> If only adjust the length of nails and keep the same wire diameter. 3-5 minutes is enough. If the nail diameter also need to be changed, then around 20 minutes will be needed for adjusting the feeding unit and gripping dies.
2. The lifespan for nail cutters, gripping dies and punches.
----> Normally two months. It depends on the operator’s proficiency
3. The material for nail cutters, gripping dies and punches.
----> Tungsten Carbide with alloy steel.
4. If there is some problems during machine running, what technical support can be provided?
----> Video technical support and online service can be provided.
5. The tolerance for nail length
----> ± 0.25mm.
6. Installation service
----> We can send engineers to your company for machine installation. The round trip flight tickets, local transportation, local accommodation should be paid by your company. Engineer service charge is US$100/day.