Medical Endoscope Camera for ENT

Medical Endoscope Camera for ENT
Your satisfaction is our success.We warmly welcome friends from all over the world to work together to find better healthcare solutions and win-win cooperation.
1.Product Show:
2.Detailed Information:
Specification and Technique Parameter
Camera
1/3’’D
Pelx HxV
795Hx598V410,000
Horizontal definition
700TV lines
Scan system(Either)
752line/50 field /sec
Minimum illumination
0.5 lux XF 2.0
Synchronization manner
Inner-synchronization
Signal-to-Noise
≥52dB
Plus control
Automatic
Video output
1.0Vp-p, 75Ωcomplex signal
Adapter(Either)
OES or rigid
Connection Cable
2.5m normal. And special length needs order.
Power
AC220/110+10% 50Hz-60Hz
Watt
25VA2.5m normal. And special length needs order.
Deposited temperature
-20℃~+50℃
Work temperature
-10℃~45℃
Work humidity
20~85%
Function
Camera, white balance, video output, the waterproof grade of camera up to IPX7.
Shooting:
The power is in order but with no image.
1)The coupler cover is not opened.
The coupler cover is for protection
2)The cable of the CCD has not inserted into the jack correctly.
Please find the correct direction of the jack
3)The output has not connected well with the AV line.
Please check whether the AV line is firm or not. If the trouble exists else. Please check whether the problem is AV line itself
4)The connection between the monitor and the camera is not well
The output of the camera should be connected with the video in of the monitor.
5)The input channel of monitor has been chosen incorrectly.
Please translate among all kinds of channels until the image is displayed.
6)The monitor is broken or the protected mode starts.
Please contact with the monitor manufacturer duly.
The endoscope is broken
The shatter of the endoscope caused by aging and water inpouring should contact
with the manufacturer duly
There is adark imagewhendisplaying.
The lightness of the Cold Light Source is not enough or it had broken yet.
Please adjust the brightness
when the dark image caused by the low value. Otherwise, please contact with the manufacturer duly.
The lightness of the monitor is not enough
Please adjust the brightness
and the contrast
The image exists, but the color is not optimal.
The parameters of the monitor have not been adjusted optionally.
Please adjust the chroma,
acutance, definition, color
and so on.
The parameters of the monitor have not been adjusted falsely.
The values of the brightness
and contrast are excess to cause much fleck on the screen when displaying.
3.Why choose us?
1. On time reply: For all your inquiry,we will try our best to reply within 24 hours.
2. Quality Assurance: Double quality check before shipping,if quailty problem we will give Compensation.
3. On time shipping: Your order will be shipped once finish quality checking.
4. On time aftersell service: Any after sell questions will be replied within 24 hours.
5. Reasonable price:We provide good quality product with best reasonable price.
4. Packing and Delivery