multi-channel infusion pump 60ml 100ml 150ml 200ml 275ml 300ml

[Product Name]Disposable Multriate Infusion Pump
[Structure]Disposable infusion pump is consisted of one valve add-medicine set, silicone reservoir, PCA(patient control assistant), regulator valve, medicine filter, conical connector, pipeline, regulator key etc.
Nominal volume(ml)
60,100,150,200,275,300
Nominal flow rate(ml/hr)
0,2,4,6,8,10,12,14
Volume automatic control
0.5ml/15min
Effective infusion dose
>90%
[Specification]
CBI+PCA+Multirate
[State Food & Drug Administration approval No]20173544165
[Operative Standard]EN ISO 13485:2003+AC:2009, MDD 93/42/EEC Annex Ⅱ Article 3
[Expected Usage]The product works as the persistent and default speed of charge. It’s driven by silicone reservoir, it realizes minim and persistent charge by controlling the flow rate using current limiting device. Patient can append dose by medical order with the help of PCA, which realize the goal of clinical minim charge.
[Characteristics]The raw material of disposable infusion pump has no side effects to human body.
[Using Instructions]
1) Open the package after confirming that the package is in good condition and the type as well as specification is correct.
2) Close the clip and then open the cover of the one valve add-medicine set, absorb the deployed liquid medicine into the sterilized injector.
3) After medicine has been added. Insert the key into the regulator valve in order to adjust to suitable flow rate, and then take the key back.
4) Open the clip, and press PCA 1~2 times to drain the air away, connect the pipeline joint after confirming that some liquid outflows.
[Points of Attention]
1) Read the instruction carefully before use.
2) Check whether the package is in good condition, or else it is strictly prohibited to use.
3) It is only for single use, discard after use.
4) The product was sterilized by epoxy ethane and assures asepsis for three years.
5) The operator must obey the sterilized operating condition.
6) Volume can’t exceed 10% of the max volume marked on reservoir, or it may blow out.
7) Its nominal flow rate was evaluated by using water for injection as its medium while the environmental temperature was 23℃±2℃.
8) The product is deposited under door temperature in dry condition.
9) Adrenalin and CAT (calcium antagonists) are strictly prohibited for use.
10) The product contains DEHP.
11) Clinical medical staff should take substitute Product to avoid possibility toxicity may arise on those high-risk crowd (new arrivals, adolescent males, pregnant/nursing women).
12) The product is not suitable for infusion by using fat-soluble drugs (e.g. Fat Emulsion).
13) based on both domestic and overseas research materials, clinical medical staff should avoid PVC tube and drugs to be militated, the product is not available for drugs which are incompatible with PVC tube.
[Package]
Individual disposable infusion pump is packed by blister packing, the middle and outer package is corrugated box.
[Storage]
The products should be stored in less than 80% relative humidity, non-corrosive gases and well-ventilated room.
Our Services
Packaging & Shipping