Surgical mask making machine fully automatic

Surgical mask making machine fully automatic
Equipment application: automatic production mask
Product:
Mask (external ear type) size: 175x95 mm (length x width, excluding the size of ear band)
General requirements of equipment:
The production line is composed of one laminating machine,
one flap feeder and two ear band welding machines, which are completed automatically by the equipment
Forming the following loading and unloading and testing procedures:
Manual feeding roll - Automatic conveying material - Cutting iron line - Ultrasonic welding book Body piece - Cutting body piece - Splitting - Turning - Feeding - Ultrasonic welding ear line - Cutting ear line - Automatic lowering Material --- Belt line output.
1) Machine size: 6500x3600x1990 mm (L * W * H)
2) Power supply: 220V AC
3) Air source: 0.5-0.6MPa
4) Equipment weight: ≤ 2000kg
5) Control mode: touch screen + PLC
6) Electrical components: solenoid valve (adek), cylinder (adek), touch screen + PLC, inductor (Ohm)
Dragon, keenshi and other big brands), gas connector (adek or domestic), regulating valve (adek or domestic)
7) There is capacity statistics function on the touch screen of the machine, which can be used to check the capacity in real time
8) Safety: the equipment has ground wire and leakage protection switch.
Equipment technical parameters Note:
1. The coiler can put 4 coils of material to feed the main body welding machine;
2. The body piece welding machine has two functions of ultrasonic welding and cutting;
3. The divider mainly feeds the cut body pieces to two ear band welding machines respectively;
4. The ear band welding machine welds and cuts the ear band by ultrasonic waves, and finally the finished product is conveyed by the belt.
Equipment installation environment requirements
1. Independent grounding, reliable grounding, grounding resistance is less than 100 ohms;
2. Power supply voltage: AC220 ± 10% V; frequency: 50 ± 1HZ; total power: about 8.5KW;
3. Ambient temperature: 0 ℃ ~ 45 ℃; Humidity: less than 90%; Moisture condensation must not be caused within the temperature range;
4. Environment: Avoid excessive dust and corrosive gases such as acids and alkalis in the use environment; avoid sunlight,
Rain to prevent affecting the performance of the equipment;
5. Install the equipment on a solid, reliable, non-deformable and flat concrete foundation to avoid abnormal installation.
In a vibrating environment;
6. Gas source requirements:
pressure requirements: 0.5 ~ 0.8 M Pa
compressed air is required to be dry, clean, oil mist is not allowed Water and gas.
Surgical mask making machine fully automatic
Surgical mask making machine fully automatic
Surgical mask making machine fully automatic