Product Description
1.ParameterStatic Dissipation layer
Surface resistance
107-109 Ω
Friction static voltage
<100V
Conductive layer
Surface resistance
equal or more than106Ω
Friction static voltage
<50V
Static decay time
5000V — 500V
<1.9s
Volume resistance
107 — 1010 ΩTest Result
Tension Strength
3.6Mpa
Breakage coefficient of elongation
188%
Tear strength(right angle)
20.6KN/M
Resilience (6pcs sheets lapping over)
14%
Temperature of impact embitterment (not cut)
-25°C No damage
Permanent variation under 70°C*22h,25% compression
17.9%
Aging in hot air(70°C*22h)
Variation of tension strength
+8.0%
Variation of breakage coefficient of elongation
-3.8%
Heat loss
1.08%
Test Standard--GB1040,GB/T529,GB1681,GB5470,GB10654,GB/T71413.Descriptions for ESD Matting & FlooringQuality dissipative mats are designed to harmlessly drain charges from personnel, tote boxes, component etc. It is lie flat-will not cart and not affected by humidify and superior resistance to abrasion, chemicals and heart resistant easy to clean and maintain.
surface resistance: 10e6~10e9 OhmBottom layer resistance: 10e4~10e6 OhmLayers:Top layer 0.5mm,Back layer 1.5mm for Thickness 2mm.
4.Applicationesd work table mat or ground mat should be laid out in the workshops and advanced laboratories for microelectronic industries such as electronic semi-conduct devices, electronic computers, electronic communication equipment and integrated circuits etc. To eliminate damages caused by static electricity.