Taidacent phone home automation switches 12V4 way WIFI relay control wireless remote switch remote control electric switch board
Description
Product features:
1-----Jog/Self-lock/Interlock customer can switch by yourself. After the mode setting is completed, the set mode will not change even if the module is powered off and restarted.
Jog: Press the long button button to release, the relay is turned on, and it will automatically turn off after about 1 second.
Self-locking: Press the long button button to release, the relay is turned on, press again, the relay is turned off.
Interlock: When you work all the way, the other 3 channels will be closed.
2-----WIFI mobile phone APP remote intelligent control, after the mobile phone is paired with the module, it can realize infinity distance control (must ensure that the module is connected to WIFI); also has manual button switch function
3-----7-24V wide voltage supply to meet most customer needs
product description:
Control mode: wifi 4-way mobile APP remote control + button manual control
Transmission mode: WIFI communication (when the control module is connected to wifi, it can support 2G, 3G, 4G network signal control of mobile phones);
Controllable line: 7-24V power supply 4 passive output control, output for mechanical switch
Control distance: infinity
Working voltage: DC DC 7-24V Power supply VCC is connected to the positive pole GND is connected to the negative pole (the back of the board is marked) (CK COM CB) Control output interface, when making mechanical switch, CB is usually not used, CK and COM form switch Output maximum control current10ATerminal platformAndroid / IOSWorking temperature0-60 degrees
Product matching process:
1. Mobile phone to collect "eWelink" download APP software
2. Install APP software
3. Register the APP software account with your mobile phone number
4. After registering OK, log in to the software.
5. Press and hold any button on the controller for 5 seconds, the indicator light changes from slow flash to uniform block; then release the button, then select “+” to add the device in the login software; click the next step until the pairing Success
6. After the automatic addition is complete, name the device yourself and click Finish; OYE! ! Can control it! ! )
1,Remote learning button
Press and hold this button, the learning indicator flashes 1 and let go, learn the first way
Learning light flashes 2 times and then let go of learning the second way
Learning light flashes 3 times and then let go of learning the third way
Learning light flashes 4 times and then let go of learning the fourth way
2,Jog/Self-lock/Interlock mode selection button
Hold this button, the indicator light D8 flashes 1E release and is set to jog
The indicator light D8 flashes 2 times and then releases it, and is set to interlock.
Flash 3 and then release it to set to self-lock
3,Manual switch button
Jog: Press to release, the relay pulls in, and it automatically disconnects after 2 seconds.
Self-locking: press to release the relay, then press again
Interlock: When any one is open, the other three are closed
Wifi network pairing button
Press any button for about 5 seconds, the indicator D03 flashes slowly into the flash