Product Description
Advantages:
Anodized aluminum Forged gun body for light weight and high pressure.
Built-in filter could be easily replaced.
Auto-cleaning reversible airless tip.
Swivel-free inlet connector.
Product Name
spray gun
Caliber
1.4/1.7/2.0mm
work pressure
2-3.5bar
AIR CONSUMPTION
14.5cfm
Capacity
600cc
Feed type
High pressure
Spray width
20mm
Model number
CX-37
Before First UseNOTICE: Before first use, clean the Spray Gun thoroughly.If not removed, the material used for testing and corrosion prevention will contaminate paint.Spraying Technique
CAUTION: DO NOT STOP WHEN SPRAYING.Spraying materials will start to set and dry.as soon as they come in contact with the air.They will cause a permanent clog if not cleared.immediately.If discontinuing spraying for more than half an hour, turn off the air supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun Body with fresh, clean water.Paint Preparation and FillingNote:Proper paint mixture is essential. Follow the manufacturer's directions. Most paints will spray easily if they are thinned properly.1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.
2. Thin the paint according to manufacturer's directions and mix thoroughly.
3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.
Products Show
Main Product Range
AUTOMOTIVE SPRAY GUN
professional high quality spray gun for car painting
L.V.L.P series
low volume and low pressure
H.V.L.P series
high volume and low pressure
L.V.M.P series
low volume and medium pressure
Excellent Atomization series
High Pressure & Low Pressure
Air Hopper series
Tire Inflating Gun series
Air Blow Gun series
Body Washing Gun series
Sandblast Gun series
Under Coating Gun Series
Workshop
Our Certifications
Regular Exhibition
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample ,but buyer need pay sample charge and shipping cost.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment or against copy of B/L.
If you have another question, pls feel free to contact us as below: