Solar and wind hybrid inverter on grid tied solar pv power wind turbine turbina eolica Inverter 1KW,

Wind and solar power system consists of solar modules,wind turbine,controller, battery and inverter sections,Including photovoltaic system. Solar and wind power systems convert solar wind into electricity to charge the battery ,and then through the controller, and finally through the inverter powered electricity load.The advantage of this system is the high reliability of power supply, operation and maintenance cost is low,due to the strong complementarity of the sun and the wind, wind and solar power generation system to make up for the defects of wind and photovoltaic sttand-alone system resources.
Due to the strong complementarity of solar and wind energy generating system complementary scenery make up for the defects of wind power and photoelectric pack and inverter link generic, so can reduce wind and solar power the cost of the system.
Solar and wind energy is the most common natural resources, but also an inexhaustible supply of renewable energy.Solar and wind energy are highly complementary in time and season:during the day sunlight,wind,no light at night,the wind is strong; the light intensity of the summer sun and wind,the weak winter sun light intensity and wind, this complementarity wind/photovoltaic grid power generation system to best match in terms of resources, to achieve continuous,stable power generation.In addition,wind power and photovoltaic power generation system is universal aspects of the battery and inverter. .
The best rational allocation of wind and solar power generation system based on the user's electricity load conditions and natural resources can ensure there liability of the system, but also reduce the cost of power generation to meet the needs of users of electricity,is the most reasonable, most reliable,most secure,most economical and most environmentally friendly power supply system
Technical Data
Model
TLS1KWS
TLS1.5KWS
TLS2KWS
TLS3KWS
TLS4KWS
TLS5KWS
TLS6KWS
Input
MPPT voltage range
DC 100~450V
Rated voltage
DC 360V
Control system
MPPT
Output
Power
1000W
1500W
2000W
3000W
4000W
5000W
6000W
Voltage range
Single phase AC 185 ~ 264V (Can adjust)
Rated voltage
220VAC
Frequency
Grid frequency50/60Hz(can adjust)
Phase
Single phase
Power factor
0.95
Max current
4.5A
6.8A
9A
13.6A
18A
22A
27A
THD
At rated power and the sine wave <3.5%
Efficiency
97%(Euro efficiency:96.4%)
Structure
Protection degree
IP65/NEMA 4X
Cooling method
Natural cooling
Noice
<50dB
Data interface
External RS 232C
Protection
Inverter
Input over voltage, output short circuit, overload overheat
Grid
Anti-islanding(IEEE 1547),over/under voltage of grid, over/under frequency of grid
Environment
Operation temperature range
-10°C~40°C(50°C)
Stored temperature
-25°C~60°C
Relative humldity
0~100%
Environment
Have no corrosion gas, flammable gas, oil mist,dust etc.
Standby power consumption
<25.0mW
Elevation
6600feet (2000m )
Size
W*H*D
442*380*110mm
415*360*155
610*420*160