Resmed face mask cpap machine ready three lahar mask machine raw material for face mask machine

Product Description
Product name
Automatic Disposable Medical Face Mask Making Machine
Material
PP nonwoven Composite fiberaluminum alloy and 304 stainless steel
Machine size
6500mm*4500mm*2000mm
Voltage
220V
control panel
Man-machine interface and buttons
Capacity
100-120pcs/min
Feture
Special welding wheel and guide wheel design, high wear resistance and long service life
Remarks
It can connect two external points or inner point ear strap machines for production at the same time (can be changed into one for two)
Non-woven Disposable 3 Ply Face Mask Making Machine is the auto equipment which be used to the product of disposable face masks, be suitable for the material of non-woven fabric , activated carbon and filter feeding to nose-clip fixing, edge sealing, cutting the finished products automatically. material from 1~3layers. The face mask machine will finish all the processing from the feeding to nose-clip fixing, edge sealing, cutting the finished products automatically.
Non-woven Disposable 3 Ply Face Mask Making Machine has features as stable performance, high productivity, low error rate and easy operation etc.
Main Features:
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .
Semi automatic flat mask production line adopts advanced design, only need to put the raw material on the feeding rack, after the completion of the modulating, the machine can realize automatic production. It only need one person to operate and fully realize the whole process of automatic production. The equipment also adopts ultrasonic welding, which is beautiful, sanitary, environmental friendly.
The output is 100-120 pcs/min. The length of nose bridge bar can be adjusted. The product size error is ±1mm. According to the needs, replacing parts of the molds can achieve a variety of specifications of mask pieces. This machine can produce all kinds of non woven masks, smooth cloth masks, gauze masks, activated carbon masks, double-nasal line masks. Support 1-5 layers of non woven mask sheet production.
1.high automation with PLC, photoelectric detection for the raw material feeding to avoid wasting and with high stability.
2.import cutting roll, no burr and durable in use
3.Material feeding by sever motor , accurate in ear loop position adjustment and welding. small in size, solid and rustproof performance with aluminum alloy frame rack.
4.20k ultrasonic ear loop welding, strong in welding portion and pulling.
5.Patent equipment, leading technology,mature process,stable quality and high efficiency.
Fully Automatic Disposable 3D Foldable Face Mask Making Machine
A popular mask in Korea, It is fully automatic production line instead, easy opearation and as well as compact size.
Main Features
1.Small size, small footprint, the whole machine adopts aluminum alloy structure, beautiful and strong without rust;
2.Extremely high output, 1-5 layers of masks can be produced according to customer requirements;
3.The folding position and size of the mask body can be adjusted;
4.The direction of the ear band of the mask is inward;
5.Compared with sub-mask production equipment, this set of equipment is more efficient and labor-saving;
6.PLC program control, photoelectric detection, high reliability, low failure rate;
Functions of earloop Mask Making Machine:
Automatic face mask production line, also known as one to three mask production line, composed of a mask body machine and three ear band composed of welding machine. Every minute can output 90-100 piece of complete plane mask, mask specifications: 175*95 mm three layers of non-woven planar filter type guaze mask. Compared with the single independent type mask making machine, joined the automatic conveyor belt and the connecting port, the unique design in addition to improve the production efficiency, reduce artificial cost, is in order to minimize the artificial participation, and reduce the risks of a mask is pollution in the production process.
Features of earloop Mask Making Machine: :
1. Ultrasonic melting technique, single man operation.
2. Automatic working from feeding to nose-wire insert, lace sealing, cutting finished products.
3. Machine frame adopts aluminum. Anti-rust, durable, easy cleaning and neat.
Raw Materials
1. Produce non woven face mask blank(body) automatically from raw material roll width 180-200mm, 10-20gsm;
2. Inserting nose wire, then forming, sealing and cutting---finished mask blank;
3. The size of mask blank is 175(L)*90(W)mm, other specifications according to customers;
4. 3 layers available.
Function introduction
This production line is a fully automatic one-to-two mask machine, one body machine drives two ear band machines.
After the main body machine outputs the mask body, the mask body sheet is conveyed to the turning mechanism by a conveyor belt structure. The reversing mechanism is used to flip the mask plate onto the belt connected to the ear band machine, and then the mask sheet is conveyed to the first mask plate on the front of the ear band machine through the conveyor belt, and finally the mask sheet is placed on the ear band by the cylinder pressing In the mask plate of the machine, the ear band machine is used to complete the welding of the ear bands of the mask and the edging, thereby completing the production of an ear band mask product.
This machine adopts PLC, touch screen control, single-phase motor for main conveyor belt, stepping motor turning, precise transmission, stable control and adjustable speed.
Product Features
1. High stability, low failure rate, beautiful appearance without rust;
2. Computer PLC programming control, servo drive, high degree of automation;
3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
Third, the technical parameters
1. Machine size length, width, and height: the whole machine has a size of 4500mm x 5500mm x 1830mmmm;
2. Voltage: AC220V 50-60HZ
3. One-to-two production line efficiency: 90-100 tablets / min
4. Power: 8.5KW
Fourth, the main electrical parts
Main machine configuration:
1.Variable frequency motor
2. Ultrasound 2 sets
3.plc control 1 set
4. 2 sets of electronic eyes
Ear strap machine configuration:
1. 2 sets of variable frequency motors
Our Services
1) Provide 24-hour service hotline.
2) Reply and find out solution within the shortest time according to customer’s requirement.
3) Provide on call service to help customer solve problems.
4) Provide free of machine installation as well as commissioning, and inform customer how to do the machine maintenance.
5) Prepare customer’s feedback tracking within one week after machine installation until meet customer’s satisfaction.
6) Provide one year guaranty and lifetime maintenance.
Packaging & Shipping
FAQ
Q: Are you a factory or a trading company?
A: We have own factory manufacturing pharma machine and packaging machines and we provide perfect OEM and after-sale service.
Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine and uploaded them to Youtube.
Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.before ship the machine,we will let the machine run one week in our factory.
Q: How can I know your machine is designed for my product?
A: You can send us samples of your product and we test it on machine.
Q: How can I know your machine is designed for my product?
A: You can send us samples of your product and we test it on machine.
Q: How can I pay my order?
A: We accept T/T, Western Union, Alibaba Trade Assurance payments.Pay 30%deposit after when finish the machine you can pay the balance before shipping.
Q: Do you have a CE certificate?
A: For every model of machine, it has a CE certificate.
Q:How is your machine quality?
More than 15 years manufacturing experience,with rich experience engineer and good CNC machine to make the with machine stable performance and high quality ,with good quality and competitive price let our machines with good comment from our customers,now our machines mainly export to north American and western Europe.
Q:How is the machine guarantee and after service?
One year guarantee,in one year,if the spare parts break,we can send the new spare parts for free but the customer need pay the express fee.
Q:How is the after service?
We have several technicians who gets passport ready to travel all over world to offer service to you.have 24hours hot line for Technical Support.We get 18hours internet line for technical support. Video camera in workshop to help you adjust and solve machine problem in working situation.We have many agents can offer the technical support in local place all over the world.
Our advantages
1. High quality + Economical Solution
Furis Group with China technology support match up your high quality requirements.
Furis Group economical price can provide you better budget control.
Furis Group strict quality control with ISO 9001 certification CE certification and other qualification can guarantee you avoiding any risk in machine selection or project implementation.
2. Professional Turnkey Project
Furis Group GMP experts and validation engineers can guide your project and documents match up the WHO GMP.EU GMP USA FDA,etc
FRS factory general planning experts can ensure your project not only quality in all aspects,but also cost efficiency flexibility and expandability and security.
Furis Group professional designing and experienced engineering team can support your project optimal implementation saving labor time and cost.
3. One-stop Technical Service
Furis Group with worldwide partners can provide you current technology and know how of machine project validation and production.
FRS Mechanical and electrical engineers can make custom-made design to match up user's requirement specification.
and manufacturing according to European standard.
HM Energetic and professional team can provide you effectively one-stop technical service from sample trial testing FAT,installation commissioning,SAT,training to documentation and validation.