Acrylic Floor Sealer Concrete Floor Sealer Garage Floor Sealer

ArmocrylA
Liquid polyacrylate lacquer for the care of stone and all kinds of mineral materials, dedusting, hardening and sealing of mineral surfaces.
Material properties:Extremely high penetrating power. Effective means of hardening concrete to great depth. Compatible with all types of dry concrete reinforcers. Favorable price / quality ratio.
Coating properties:
Resistance to water, fats, petroleum, aqueous solutions of acids and alkalis.
Dedusting:Long service life without reapplication.Act
Extremely high penetrating power. Effective means of hardening mineral materials to great depths.
Composition
Low viscosity aqueous solution of lithium silicate, catalysts and special additives.
PropertiesDry residue ≥10%, Density 0.85 g/cm3, PH 12
Consumption1 liter for 5-12 m2
Drying time:Initial - after 2 - 4 hours at 20°C. Complete drying of the surface - after 24 hours at 20°CStorage:9 months in factory sealed packaging in a dry place. Keep away from freezing and high temperatures.
Application
It is used to impart increased hardness, dustlessness to the mineral surface, as well as resistance to moisture and oil products.
Armocryl A Stone is applied with a roller, brush or air spray on both fresh and dry concrete. Application to fresh concrete also protects the concrete from undesirably rapid evaporation of water during the set of strength periods. When applied to an old dry mineral surface, Armocryl A Stone gives its surface a dustless and extra hardness.
When processing old surfaces, it should be noted that the material is compatible with further finishing with almost all epoxy, PVC, acrylic and alkyd materials.
For outdoor and indoor use in warehouses, industrial workshops, parking lots, shops, food production and warehouses, health facilities, galleries, museums, shops, supermarkets, shopping centers, gas stations, exhibition halls, fitness centers, beauty salons, shopping and office centers, schools, universities, office buildings, entertainment centers, airports, railway stations, etc.
Processing efficiency: 75% at a flow rate of 1 liter per 6 m2 - increasing the hardness of the mineral surface, for example concrete by 56.6% compared to untreated concrete, water resistance - no for 10 days at a pressure of water of 0.3 MPaPackaging & Shipping
Capacity 15 liters
.Company Information
We have been working in the market of building materials since 2002 and produces fillers for concrete, means for protecting mineral surfaces and primer for various purposes. All this time we have been supplying materials for work on industrial facilities and construction. Over the past few years, we have significantly increased our production capacity, passed ISO 9001: 2009 product certification, and also significantly increased the range of products we produce. The range of our products today allows us to offer professional-quality products at very affordable prices in the market. All materials have the necessary quality certificates and comply with the specified indicators and standards.