Modern Steel Design Body Wood Burning Stove for Sale

Product Description
Modern Steel Design Body Wood Burning Stove for Sale
We congratulate you on the excellent choice! We wish you many pleasant moments with your new appliance. If your choice is awood-burning stove, it is produced and tested in accordance with the requirements of the European standard EN 13240. If yourchoice is a fireplace, it is produced and tested in accordance with the requirements of European standard EN 13229. They bothrespond to the approved technical documentation.

It is necessary the following conditions to be kept in order to ensure a safe and correct work of the wood-burning stove:The wood-burning stove should be installed in rooms with sufficient airflow, which is required for the combustion.Not every wood-burning stove could be connected to any chimney. Before assembling the wood-burning stove, check if thestatic pressure and the chimney dimensions conforms to the needed parameters for the wood-burning stove. If the woodburningstove does not conform to the chimney, it will lead to a lower burning rate and polluting the glass with soot.The chimney should be high enough (at least five meters). only one more wood-burning stove can be connected to the samechimney. The flue draught should be higher than 10 Pa but for stoves with a boiler up to 15 Pa. If the chimney is too high (thedraught exceeding 35 Pa) then it is necessary to mount a supplementary valve to reduce the draught.The chimney should be very well insulated, with inside diameter at least ø 150 mm or with a section area at least 200 cm2.The wood-burning stove should not be connected to a chimney when there is a solid fuel boiler connected to it.The floor, where the wood-burning stove is placed, should be flat and horizontal, made of non-combustible materials(mosaic, marble, terracotta, etc.). If the floor is not heat resistant (carpets, linoleums or others of the same kind) a stable,non-combustible platform should be used, made of steel, glass or stone plates.If there are any combustible materials or constructions, the wood-burning stove should be away from them at specifieddistances on the rating label or there must be put an additional incombustible screen.After the installation of the wood-burning stove, it has to be attached to the chimney through flue pipes. The connectionsbetween the flue pipes and the socket should be tight. The flue pipe should not enter into the chimney.Specification Product NameWood Burning Stove - Triumph F
Nominal heat outputspace heatingoutputkW15water heatingoutputkWMaximal thermal outputspace heatingoutputkW20water heatingoutputkWMaximum operating pressurebarTesting pressurebarWater contentlThermal dischargerEfficiency%75.43CO at 13% O2%0.0916PM emissions at 13% O2mg/Nm338.3NOx at 13% O2mg/Nm3OGC at 13% O2mg/Nm3Triple valueg/s-°C-Pa11.73-249-12Fuel masskg/h3.61Dimensionswidthmm585depthmm515heightmm1 005Ovenwidthmm408depthmm400heightmm220Combustion chamberwidthmm516depthmm354heightmm338Flue diameter (outside)mm150ColorgreyLiningNet weightkg105Gross weightkg125Packaging dimensionswidthmm700depthmm630heightmm1155about Us
VK Impex Ltd. is a family business started in 2010. Our initial concept was distribution and export of Prity fireplaces and stoves. Throughout the years we started working with other Bulgarian producers and slowly we managed pick out the best quality products with the best value from the Bulgarian market.

Our mission is to deliver quality products to customers around the world that would satisfy any specific need related to heating. Our main goal is to become the biggest exporter of heating products in Bulgaria, with the ability to supply the widest range of best value products from the market.

We are always happy to provide any type of information related to the products that we offer and help you choose the best option for you. Do not hesitate to contact us with any questions or inquiries that you have.TestimonialsCertificationsContact Us Copyright © 2018. VK Impex Ltd. All Rights Reserved Product Ranking Service by Opal Infotech