BAE503 5-function Medical Equipment Adjustable Electric ICU Nursing Therapy Bed

Product Description
BAE503 5-function Medical Equipment Adjustable Electric ICU Nursing Therapy Bed
Separate lifting fence
The guardrail can be moved with the bed. Whether the patient is lying on the bed or resting in a half-bed, the guardrail can effectively protect the patient and reduce the risk of falling.
The gap between the rear guardrail and the rear bed plate is small, no guardrail baffle is needed, and it can operate with the function of the bed while protecting the safety of the patient
Bed covering
Independent bed-board edging, easy to clean, safe and beautiful
High-quality bed panel
High-quality cold-rolled steel plate, the overall mold is stamped and formed at one time, strong and durable, and good strength. Multiple ventilation holes, perfect ventilation effect
Hand-held controller
Equipped with hand-held controller, graphical instructions, easy to operate
Angle display device
The front and rear guardrails are equipped with a angle display device, which is convenient for medical staff to observe and confirm the patient's condition.
Drainage bag hook
There are four drainage bag hooks on both sides of the bed board
Headboard/ footboard
The headboard/ footboard can be quickly disassembled, so that the nursing staff can operate it more conveniently during the treatment or other needs. At the same time, the head/foot of the bed can also be locked, ensuring the safety of the patient during transportation.
Restraint device
There are three restraint device on the left and right sides under the bed board, which have high strength.
Guardrail touch controller
Bedside control buttons are embedded on the inside of the guardrail and the outside of the front guardrail to facilitate the operation of patients and medical staff.
Patient controller has emergency stop button
Electric and manual CPR
Both sides of the bed are equipped with manual CPR function, which can quickly restore the bed board to a horizontal state during emergency and power failure.
The operation panel and the hand-held controller have electric CPR button functions.
Central control casters
Silent medical double-sided casters with a diameter of 125mm, can perform locked, free and directional three-stage type.
Brake operation can be performed around the bed.
The lowest position indicator of the bed
When the bed is not at the lowest height, the orange LED on the guardrail operation panel lights up. When lowered to the lowest height, the light goes out. It is easy to see if the bed at the lowest position or not when nursing staffs patrol at night.
only for products with nurse operation panel.
New safety guardrail
When the inside of the guardrail is stressed and cannot be opened, it must be pressed inward from the outside to open the guardrail, effectively avoiding the risk of patients falling into bed.
Optional:
Mattress
X-ray bed board
Oxygen cylinder holder
IV Pole
Extended bed frame
Weighing systemSpecificationLength
2140mm
Width
1050mm(raise the guardrail)
1040mm(lower the guardrail)High-low
450-770mm
Back lift
0~70°
Knee lift
0~25°
Knee lift
0~22°
Tilt
-12°~12°Φ125mm central control casterYes250kg
Related Products
Related Products
2 Cranks Manual Hospital bed
Bed board: perforated steel, epoxy powder coated and baked finish, 4-part.
5 Function Motor Hospital Bed
The WANROOEMED BAE517EC Electric Hospital Bed is an adjustable electric hospital bed, enjoys a reasonable price with high quality and safe performance. The BAE517EC Electric Bed meets stringent quality and safety standards, is a good choice for patients and caregivers.
8 Function Electric Hospital Bed
It is equipped with LINAK motor imported from Denmark which is quiet and noiseless and able to support over 250kgs.
5 Function Electric Patient Bed
Backrest upward angle: 75°
Footrest upward angle: 40°
Height Adjustment: 480-730mm
Company Information
Home
FAQ
FAQ
Q: Where is your company located?
A: Our company is located in zhangjiagang city,near shanghai
Q1: Are you trading company or manufacturer?
A: We are factory which has over 20 years' manufacturing experience.
Q2: What's the MOQ?
A: 1 set.
Q3: How long is your delivery time?
A: 5 - 30 days after order /confirm/ied. based on the item and quantity.
Q4: Can you send samples?
A: Yes, samples can be sent for your evaluation.
Q5: What is your terms of payment?
A: If amount ≤ 1000 USD, 100% in advance, if amount ≥ 1000 USD, T/T 30% as deposit, and 70% balance before shipping. We'll show you the photos of the products and package.
Payment terms: Trade assurance, T/T, L/C, Western Union...
Trade terms: EXW, FOB, CIF, DDU...
Q6: Where's your general loading port?
A: Shanghai port for LCL and Zhangjiagang Port for FCL, or as your demand.
Q7: Can you do OEM?
A: Yes, we can do OEM. We have complete facilities and more than 20 years experiences ready for your service.
Q8: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q9. For tenders, whether you can provide all necessary documents.
A. Yes. We win a lot of tenders by providing complete documents and helped our customers.
Q10: How to deal with the faulty?
A: First, our products are produced in strict quality control system, but if any faulty, we'll send new spare parts for free in 1 warranty year.
Secondly, our after-sales department will periodically follow up customers.
Q11: How can get the shipping cost?
A: You tell us your destination port or delivery address, we check the Sea Freight or Air Freight for you based on your requirement.