Alternating Air Pressure Mattress With Pump
Medical Anti Bedsore and Anti Decubitus Inflabtable Tubular Air Mattress 5" 18/ 24 cells
The traditionally accepted method of pressure sore control is to turn the client at regular intervals to observe the areas of risk regularly. The alternating air pressure medical bed mattress is intended to compliment this treatment, observation of the client and turning when necessary should still be considered as part of the treatment.
General:
• For patients who are likely to spend more than15 hours per day in bed.
• For patients who are classed as medium to high risk of developing pressure ulcers.
Specification:
Economic 5” 18/ 24 Cells Tubular Mattress
Top Quality Aluminum Pump System
Pump
Pad/ mattress
Item: VU601
Item: VU6002
Power supply: 110V/220V; 50~60Hz
Size: 80''(L) x 32-36''cm(W)
Air output:: 6-8 liter/min
4” 24 cells; 4.5’’ 18 cells
Pressure range: 50mmHg-120mmHg
Top cover: Nylon PU/ strength
Cycle time: 12 min.
Air cells: Nylon/ PVC/ TPU
Power consumption: 7W; Fuse: 1A
Bottom: tarpaulin/ nylon PU
Size: 27.5cm(L) x 13.5cm(W) x 9cm(H)
Mattress weight: 5.5-6.5kg
Weight: 1.6kg
Weight Capacity: 135-145kg
Certification: CE, FDA, ISO13485
Standard a set includes:
pump, mattress, connect hose, repair kit, user manual and gift box.
Alternating inflation and deflation circularly, compression and decompression of air waves help patients to changebody position, increasing the blood circulation, antibedsore and prevent decubitus.
Details:
1.Durable Aluminum pump, adjustable hangers/ hooks to fit any any bedrails; Two programming modes for option- Static and Alternation; Knob control for pressure force level, easy operation
2. Medical grade fabric material, high strength, durable, breathable and skin-friendly. Detachable tubular cells design is used flexibly.
Installation/ Use
1.Unroll the mattress.
2.Position it on the bed.
3.Secure it to the bed with the fixing straps.
4.Hand the compressor(pump) at the end of the bed ( foot end) using hooks.
5.Connect the mattress feed pipes to the compressor (pump) connector by matching the appropriate outlets.
6.Connect the electrical power supply cable to the compressor (pump).
7.Guide it along the bed to the mattress plug socket and plug.
8.Press switch to turn on the compressor (pump).
9.Before positioning the patient onto the mattress, wait until the mattress has been fully inflated.
10.Select the pressure corresponding the patient’s morphology.