mgo eps foam exterior wall sandwich panel

mgo eps foam exterior wall sandwich panel
Product Description
Compressed by two pieces of magnesium oxide sheet and core material by cold pressing
Magnesium oxide board
The MGO board is made of high-purity magnesium oxide, MGO sulfate (Mgoso4), high-strength glass fiber mesh, perlite, and non-woven fabric.
Core material
EPS,PU,XPS,Rock wool,Phenolic foam board,Honeycomb panels (paper, aluminum, etc.)
Standard dimension of Quacent SIPs:Size: 4'x8' / 4'x9' / 4'x10' / 4'x16' / 4'x20' (Feet)1200mm x 2400mm / 1200mm x 270mm / 1200mm x 3000mm)
Thickness: 4.5" / 6.5" / 8.25" / 10.25". (Inch)114mm / 165mm / 209mm / 260mm
Types of spline: Dimension lumber, OSB, Light Gauge Steel StructureRegularConventional thickness1220x2440(mm)
50-200(mm)
Advantages
Advantages to use SIPsArchitectural Benefits
High quality construction method.Comfortably warm, clean, and quiet.Cost Benefits
Equal or lower first costs.Lower long term operating costs.Incentives available from utility service provider for energy efficient design.Lower maintenance costs for you.Construction Process Benefits
Easy to construct, with short learning curve.60% shorter construction timeQuick turnaround time for greater satisfaction.Increased builders production capacity.Environmental Benefits
50% less framing lumber.50% more energy efficient.Requires less room at building site (less site disturbance).Less construction waste.Usage:
SIPs are prefabricated systems used primarily for walls and roofs. SIPs employ composite materials, reduce waste through modular construction methods, achieve high insulation values, and may be used instead of many conventional building methods.
Comparsion of Core:CoreAdvantageDisadvantagePolyurethaneThe main advantage of polyurethane (or the much harder to pronounce derivation, polyisicyanurate) is that it has the highest R-value of any SIP panel. After what's called thermal drift, it's about 6 to 6.8 of R-value per inch of panel.The main detractor of urethane panels is the high cost. The other disadvantage in terms of construction is that polyurethane has a high melting point, hot wire burners (the primary method of modifying EPS and XPS panels on site) can't be used.EPSOver 80% of the SIP panels installed are EPS. EPS core material is widely available. It is easy to modify on sight and most sip installers have experience dealing with EPS. It's also the least expensive option in terms of material cost. XPSXPS has many of the best characteristics of both polyurethane and EPS. It has a high R-value (5 R-value per inch of panel). It is dense and stable yet has a relatively low melting point so on-site modifications are as easy as EPS. Also, like EPS, it bonds easily to OSB and gypsum board.Unfortunately XPS is expensive and manufactured panels are not widely available
R Value of SIPsPanel Thickness
EPS Core
thickness
R-Value
(USA)
U-Value
(UK) 4 1/2’’ (115mm)
3 5/8’’ (92mm) 16
0.355 6 1/2 (165mm)5 5/8’’ (143mm) 24
0.237 8 1/4 (210mm) 7 3/8’’ (187mm) 33
0.172 10 1/4 (260mm)9 3/8’’ (238mm) 40
0.14212 1/4 (311mm)11 3/8’’ ( 289mm)’’ 49
0.116
Panel weight table: 4' x 8' Ft4' x 10' Ft4.5" Inch45kg56.25kg6.5" Inch47.5kg59kg8.25 Inch50kg62.5kg10.25Inch52.5kg66kg
Packaging & Shipping