Agriculture used Commercial Aquaculture Greenhouse

Agriculture used Commercial Aquaculture Greenhouse MainparametersofgreenhousestructurevenlotypeGreenhousespan9.6mTopofeachspan3Greenhousespacing4mShoulderheight4.5mTopheight5.2mExternalsunshading5.8mRoofangle22degreesTheservicelifeofthemainskeletonofthegreenhouse20yearsperformanceindexWindload0.35kn≥/m2Snowload0.2kn≥/m2Maximumdrainagecapacity140mm/h.seismicfortificationintensity7ambienttemperature‘-10℃~41℃’Electricalparameters
220V/380V(+5%,50HZ,singlephase
/threephase)
Greenhouse Foundation
The four sides are the bar base and the interior is the independent basis. ItIndependent foundation: the column foundation is reinforced concrete structure. Independent foundation 240*240*800, reinforced I grade, concrete label C20 above. ItStrip foundation: 0.4 meters high brick skirt wall around the greenhouse, high 100mm and wide 26mmC15 concrete top.
Greenhouse frame structure
The structure of greenhouse is Venlo three spire PC plate glasshouse with main steel structure, aluminum alloy sliding door and condensate recovery tank. All carbon structural steel surfaces are treated with hot dip galvanizing and anticorrosive treatment. The thickness of galvanized steel is greater than or equal to 0.08. All steel pipes conform to the standard of GB/T13793-92 longitudinal welded steel pipe, and all steel products are Q235-A/B grade.
Cover material
1. The material used for covering the greenhouse is 4 + 0.2 mm thick float glass.
The transmittance rate is >93%. Heat transfer efficiency 3%Use life longer than 15 years.
2. The top cover material of the greenhouse is Germany's Bayer 8mm thick hollow PC board, which is guaranteed by the manufacturer for ten years.
3. the top and four sides of the surface are used for 6061 special aluminum profiles for the greenhouse. The profile standard uses the national standard of "GB/T5237.1 ~ 5237.5-2000 aluminum alloy building profiles" to produce the main force components. The surface was treated with anodizing. The thickness of the oxide film is carried out according to the national standard.
4.the sealant strip is a greenhouse professional anti-aging three ethylene propylene rubber (black), it is not easy to aging, strong sealing, good heat preservation performance.
The main structure of the greenhouse
1) column: 100 * 60 x 3mm hot dip galvanized rectangular pipe, the column bottom plate adopts 10mm thick steel plate, and the zinc plating thickness is 0.08 to 0.10mm.
2) side side sub column: adopt 100 x 50 x 2.5mm hot galvanized rectangular pipe, column bottom plate adopts 10mm thick steel plate, zinc plating thickness 0.08 - 0.10mm;
3) end face column: adopt 100 x 50 x 2.5mm hot dip galvanized rectangular pipe, column bottom plate adopts 10mm thick steel plate, zinc plating thickness 0.08 - 0.10mm;
4) a doorpost column: a 100 * 50 x 2.5mm hot galvanized rectangular tube with a zinc plating thickness of 0.08 to 0.10mm;
5) side pull beam: special Cold-Formed Channel Steel with [80 * 40 x 2.5mm, zinc thickness 0.08 - 0.10mm;
6) end pull beam: special cold formed channel steel with [80 * 40 x 2.5mm, zinc thickness 0.08 - 0.10mm;
7) frame scissors support: hot-dip galvanized 12 stainless steel, 12 0.10mm, 0.08 mm - zinc plating.
8) truss upper chord: using 50 x 50 x 2.0mm hot-dip galvanized rectangular tube, galvanized thickness 0.08 - 0.10mm; truss lower chord: using 50 x 30 x 2.0mm hot-dip galvanized rectangular tube, galvanized thickness 0.08 - 0.10mm; truss abdominal rod: abdominal rod is welded with 16 round steel with the thickness of 0.08 - 0.10mm; zinc plating thickness of 0.08 - 0.10mm;
9) roof truss: a 50 * 30 * 2.0mm hot galvanized rectangular tube with zinc plating thickness of 0.08-0.10mm
10) rain trough: the 2.0mm thick hot-dip galvanized sheet is mechanically formed, the aluminum alloy condensate recovery tank is installed under the raining trough, the end and the gutter junction is connected to the drop pipe (PVC tube [Phi] 110 x 2), and the drains are sent to the drainage ditch through the drainage pipe. The large section design of the gutter meets the requirement of the large amount of rainfall and the greenhouse. Bearing capacity, taking into account the convenience of the operator's installation and maintenance work. It
11) condensate recovery trough: under all the gutters, there are "U" or "shape" aluminum alloy condensate recovery tank (model 1641), and equipped with bracket and PE hose terminal outlet, condensate water through the pipe to the greenhouse, in order to better reduce humidity, to help crop growth and prevent insect pests. It
12) fasteners are made of domestic hot-dip galvanized standard parts such as bolts, nuts, washers, core rivets, self tapping pins, etc. It
13) roof beam: LD31-RCS profile is adopted to make the PC plate easy to install and firm.
14) door: each side of the greenhouse is equipped with a set of doors. The aluminum alloy white glass suspension type upper rail moving door has a specification of 1.95 x 2.1m (two sets). It
15) top ventilation system: each rack has three rack and pinion skylights on each top of the greenhouse. The ventilation volume is 20% and the opening angle is 25 degrees. The system includes rack and pinion, motor, coupling, push rod and transmission shaft.
Agriculture used Commercial Aquaculture Greenhouse
company profile
Weifang green space greenhouse Engineering Co., Ltd.is located in the Weifang,strategic location,convenient transportation.Company is a professional engaged in the design,processing all kinds of greenhouse and supporting facilities of the company, mainly the production of flower market greenhouse,greenhouse,aquaculture,livestock breeding greenhouse,ecological restaurant greenhouse,glass greenhouse,solar panel greenhouse,plastic sheeting greenhouse and the most basic and modern automatic control greenhouse,can also provide internal and external such systems,Greenhouse structural accessories and so on.
Public announcement of economic strength, technical expertise, thoughtful service, construction is fast, according to local climatic environment, soil, planting model, the design and construction of various types of winter warm greenhouses, high-tech vegetable demonstration base, greenhouse greenhouses, intelligent greenhouses, nursery greenhouses, even a greenhouse, simple greenhouses(arch shed)and new high-temperature greenhouses, etc.
Companies can provide customers with all agricultural technical guidance. technical personnel output, vegetable cultivation, flower planting, ecological restaurants, sightseeing ecotourism greenhouse picking and other services.
Agriculture used Commercial Aquaculture Greenhouse
Why do you choose us?
1.our professional team can customize product design and production according to customer requirements.
2.all parts and components should be independently produced to avoid all intermediaries.
3.provide a one-stop key project from the greenhouse production design, construction, cultivation and planting.
4.commitment to quality assurance of production cycle, after-sales service team.