12v high quality 150w waterproof actuator for car

12v high quality 60w waterproof actuator for car
Product Information
HTW10-Combinations of components (Linear Actuator)
The Linear Actuator parts are as follows:
1) Linear Actuator:
(Stainless steel tubes, micro-switches, circuit boards, bearings, micro motor,
reduction gear, screw, nut, bushings, putter, slide, spring, and
nylon turbine) and other components.
2)Purpose:
Agricultural machinery, industrial machinery, excavators, bulldozers,
harvesters,large sweeping vehicles, large machinery, etc.
Linear actuator Working Principle
Motor through a gear reducer, drive a screw nut. The rotational movement of
the motor into a linear motion, and the use of motor reversing complete
plunger action. Such as the action of the lever, joystick or rod body rotation,
shaking complex.
By change lever arm length, can increase or increase the stroke.
Stroke control deviceDriven turbine to rotate the motor gear on the scroll,
so that the screw for axial movement within the turbine, driven by the link plate
stopper rod accordingly to move axially to the desired
stroke, by adjusting the stopper depressed stroke switch power off,
the motor stops running (the same positive and negative control).
Model:
HTW10
Usage: Boat, Car, Industrial machinery, windows, cleaning cars,, Other
1)Voltage:
12VDC 24VDC 36VDC or 48VDC permanent magnet
2)Motor Power:
150W
3)Standard stroke:
100 150 200 250 300 350- 1000mm,(option)
4)Standard mounting dimensions:
HTW1000-B:Stroke+250MM (Potentiometer)
HTW1000-A:Stroke+200MM(Clutch)
5)ps:The special
stroke could be designed according to your request
6)Load capacity:
7000N
7)No load speed:
35mm/s(2000N) 11mm/s(6000N) 8.5mm/s(10000N)
8)Type of duty:
20%
9)Ambient temperature:
-25°C~65°C
10)Protection class:
IP65
11)Built-in limit switches
not adjustable after leave factory
12)Low noise design,
db<53
13)Certification:
CE,ROHS,ISO9001-2008
14)Colour:
Black
Not what you want? Come here to see?
Associated Products

Company Information
Certifications
Packaging & Shipping
FAQ
Q: What if I need an actuator using a Stroke length or Force that you don't stock?
A: We have many other actuator configurations available, and we'd be happy to make a Custom Order for you. Please visit our Custom Orders section or contact us with your requirements.Q: How can I mount your linear actuators?
A: Every linear actuator we sell features mounting holes on each end of the actuator body. Combine these with our mounting brackets (with a 180° turning radius) and you have a full range of mounting solutions. Remember to mount the actuator on something that can bear its weight too.Q: Do your actuators come with internal limit switches? How do they work?
A: All GEMING actuators come equipped with builtin limit switches. The limit switch stops the actuator once it has hit the end of its complete travel length in either direction, until polarity is reversed. This prevents damage from over-extension and also conserves electricity for low power consumption applications.Q: What are the actuator dimensions and/or specifications?
A: The technical data section of our website contains measurement details, product specifications, and wiring schematics. This includes actual CAD model drawings of each product. Each individual product page also has a link to its own specifications, And if you require additional information please contact us!
Q: Can the actuator hold a load when partially or fully extended?
A: All GEMING actuators can hold their rated Force weight when stopped at any point along its stroke length. If your actuator is rated for 400 lbs, it will hold that amount when stopped, even if the power is disconnected.