Anesthesia depth monitor Anesthesia depth index
1. Anesthesia depth index (CSI): 0-100.2. The burst inhibition ratio of EEG (BS%): it is suggested that the burst inhibition ratio of EEG signal in the past 30 seconds can be displayed in the form of 0-100% when the EEG is formed into equipotential or wave "flat" line. The frequency of burst inhibition, variability and EEG power directly reflect the change of intracranial pressure.3. Electrode alarm: if the electrode impedance is too high or the electrode lead falls off, the anesthesia depth detector will give an alarm.4. Electrode impedance range: less than (1-5) k Ω.5. The six function keys are CSI (anesthesia depth index), EEG (electroencephalogram), record, data, setting and alarm.6. Storage: data storage 8g.7. Alarm and alarm elimination: the anesthesia depth detector is equipped with an audible alarm device. When an alarm occurs, it has the function of alarm. Press the mute key on the panel to eliminate the alarm; press again to restore the alarm.8. Demonstration function: anesthesia depth monitor shall have demonstration function interface.9. Alarm range of anesthesia depth index: upper limit: 100; lower limit: 0 error: ± 1.10. Various alarm selection and alarm elimination functions:a) It shall have two alarm modes: sound alarm and light alarm;b) It shall have alarm mute function;c) In case of alarm, it shall have alarm function. Press the alarm key on the touch screen to eliminate the alarm; press open again to recover the alarm.11. EMG: 0-100.