Vibration Meter 614-1185-nd Fluke-805 Fluke Vibration Meter Fluke 805

Vibration Meter 614-1185-ND Fluke-805 :
***The reliable, repeatable, accurate way to check bearings and overall vibration:
Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.
***What makes the 805 the best choice?
• A meter – not a pen – that measures overall vibration as well as specific variables like bearing condition and temperature, to provide a more complete picture.
• A combination vibration and force sensor tip that compensates for user variance (force or angle) yielding accurate, repeatable readings.
• A four-level severity scale and onboard processor calculate bearing condition and overall vibration using easy-to-understand textual alerts (Good, Satisfactory, Unsatisfactory, Unacceptable).
• Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz) covering most machine and component types.
• Straight-forward user interface that minimizes the user inputs to RPM range and equipment type.***Features and Benefits:
• Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure
• Consistent data quality at both low and high frequency ranges
• Four-level scale indicates severity of problems for overall vibration and bearing condition
• Exportable data via USB
• Trending in Microsoft® Excel using built-in templates
• Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
• Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
• Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
• Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities
• On-board memory holds up to 3,500 measurements
• Audio output for listening to bearing tones directly
• External accelerometer support for hard to reach locations
• Flashlight for viewing measurement locations in dark areas
• Large screen with high resolution for easy navigation and viewing***Use the 805 to check the following machine categories:
• Chillers (refrigeration)
• Fans
• Cooling tower drives
• Centrifugal pumps
• Positive displacement pumps
• Air compressors
• Blowers
• Generic gearboxes (rolling element bearings)
• Machine tools (motor, gearboxes, spindles, etc.)
•Export your result to Excel through USB connection
•Trend the readings with the pre-built Microsoft® Excel templates and plot graphs
•Compare the overall vibration readings to ISO Standards (10816-1, 10816-3, 10816-7)

***Included accessories
• USB cable
• Storage case
• Belt holster
• Quick reference guide
• CD-ROM (includes MS Excel template and documentation)
• Two (2) AA batteries
------------------------------------------------------------------
Low frequency range (overall measurement)
10 Hz to 1,000 Hz
High frequency range (CF+ measurement)
4,000 Hz to 20,000 Hz
Severity levels
Good, Satisfactory, Unsatisfactory, Unacceptable
Vibration limit
50 g peak (100 g peak-peak)
A/D converter
16-bit
Signal to noise ratio
80 dB
Sampling rate
Low frequency
High frequency

20,000 Hz
80,000 Hz
Real time clock backup
Coin battery Sensor
Sensitivity
100 mV g ± 10%
Measurement range
0.01 g to 50 g
Low frequency range (overall measurement)
10 Hz to 1,000 Hz
High frequency range
4,000 Hz to 20,000 Hz
Resolution
0.01 g
Accuracy
At 100 Hz ± 5% of measured value Amplitude Units
Acceleration
g, m/sec²
Velocity
in/sec, mm/sec
Displacement
mils, mm Infrared Thermometer (Temperature Measurement)
Range
-20 °C to 200 °C (-4 °F to 392 °F)
Accuracy
±2 °C (4 °F)
Focal length
Fixed, at ~3.8 cm (1.5") External Sensor
Note: Fluke supports but does not provide external sensors
Frequency range
10 Hz to 1,000 Hz
Bias voltage (to supply power)
20 V dc to 22 V dc
Bias current (to supply power)
Maximum 5 mA Firmware
External interfaces
USB 2.0 (full speed) communication
Data capacity
Database on internal flash memory
Upgrade
Through USB
Memory
Up to 3,500 measurements Radiated Emission
Electrostatic discharge: burst
Standard EN 61000-4-2
Electromagnetic interference
Standard EN 61000-4-3
RE
Standard CISPR 11, Class A Environmental
Operating temperature
-20 °C to 50 °C (-4 °F to 122 °F)
Storage temperature
-30 °C to 80 °C (-22 °F to 176 °F)
Operating humidity
10% to 95% RH
(non-condensing)
Operating/storage altitude
Sea level to 3,048 meters (10,000 feet)
IP rating
IP54
Vibration limit
500g peak
Drop test
1 meter General Specifications
Battery type
AA (2)Lithium Iron Disulfide
Battery life
250 measurements
Size (L x W x H)
24.1 cm x 7.1 cm x 5.8 cm
(9.5 in x 2.8 in x 2.3 in)
Weight
0.40 kg (0.89 lb)
Connectors
USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector)
---------------------------------------------------------
--------------------------------------------------