High lumen ETL certificate 10cm cut tiras de led 120 volt

High lumen ETL certificate 10cm cut tiras de led 120 volt
Product Description
This product is our new product,popular sold in Europe country,such as France,Germany,Fineland,Sweden,etc.
It works with AC230V socket directly by one plug,IP67 waterproof,available indoor and outdoor installation,each 10cm per cut.
Each unit is 1800lm/m,high lumen and enough for lighting/decorations.
Here attached available emitting color 2400k2700k3000K3000K4000K5000k6000KRed Green BluePinkYellow1800k
Please find basic info as follow Model NoYH-HRF402835220S-W/WW/NW-C/MLed TypeSMD2835 LED CHIPS,LED Quantity80led/mPower20w/mInput AC230VCut length10cm per cutLumen1800lm/mWaterproof gradeIP67,available indoor/outdoorWarranty2 yearsPCB width/color10mm,white color PCBPackage50m/roll,2rolls/cartonSize15*8mm(w*h)
Please feel free to contact us if need certificate,document,or other information.
Application
1) Architectural decorative lighting
2) Archway, canopy and bridge edge lighting
3) Amusement park, theater and aircraft cabin mood lighting
4) Emergency hallway lighting
5) Auditorium walkway lighting
6) Stairway accent lighting
7) Concealed lighting
8) Backlighting for signage letters
9) Channel letter lighting
10) Emergency exit path lighting
11) Cove lighting
How to conncet the led strip light :
1.Install:Take out the package,make sure it comes with necessary accessories,which should include:fixing clips,middle plugs,end caps,head wires.fix the strips with clips onto where you need,put the wire into sockets to light the strips.
2.Cut: Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end with end caps,seal with enough glue to make sure it is still waterproof.
3.Connect: Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of two separate strips to connect them into a long strip,after well connected,seal all the plugs with enough glue.
Accessory
Packaging & Shipping