Nonwoven 3ply Medical Face Mask Machine

Product Description
Face Mask Machine

Main Equipment
Equipment size: 6850mm (L) × 3600mm (W) × 1900mm (H);Appearance color: RAL9003, according to this standard without special instructions;Equipment weight: ≤5000kg, ground load ≤500KG / m2;Working power: equipment 220VAC ± 5 ﹪, 50HZ, rated power about 9KW;Compressed air: 0.5 ～ 0.7 MPa, using flow rate of about 300L / min;Working environment: temperature 10 ～ 35 ℃, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanness no less than 100,000 grade).


Equipment production capacity:(1) Production efficiency: 90-110ppm;(2) Qualification rate of equipment production: 98% -99% (except when the incoming materials do not meet the requirements or employees' improper operation is excluded)(3) Equipment failure rate: 3% (refers to the failure of the equipment itself)(4) Equipment staffing: 1 person (1 person can monitor 1 to 3 production lines at the same time)

No.
Part Name
Quantity
Comments
1
Water filter cloth / filter cotton / water absorption layer place roll mechanism
3 sets
Max 4 sets ，randomly with 3 sets
2
Nose bridge strip placed roller mechanism
1 set
3
Nose bridge straightening mechanism
1 set
width 3-7mm
4
Nose bridge strip driving ，cutting mechanism
1 set
width 3-7mm
5
Cloth hemming mechanism
1 set
6
Roll welding edge sealing mechanism
1 set
two side
7
Cloth driving mechanism
2 sets
8
Cloth fan folding mechanism
2 sets
9
Roll welding side seam mechanism
1 set
10
Roll-sealing mechanism
1 set
11
Transfer line
3 lines
12
Shunt institutions
2 sets
13
Ear band welding machine mechanism
2 sets
14
Cutting line
2 lines
15
operating system
1 set
16
Operation panel
1 set
Product process
Raw material-Forming-Nose Bridge filling-Hemming and pressing-Mask body welding-Cut-Delivery and shunt-Ear spot welding-Collect- Package-Disinfection sterilization-parsing (EO）-Finished product shipment


In order to realize the above manufacturing process, our company is equipped with fully automatic production equipment. Fully automatic equipment is integrated, 1 set mask cut slice machine drag 1 or 2 sets ear spot welding machine,it can be automated from raw material feeding to packaging.
Finished product
How Medical Masks Work
Type
Project
Specification
Time
Remark
Disposable medical protective mask
Production and Package
150000 pieces
25hours
Loading，shipping，discharge
150000 pieces
8hours
Disinfection
Sterilize
150000pieces
24hours
10 cubic sterilizer
Regular parsing
14 days
High temperature, ventilation analysis
above 7days
Test
Ear band tension
20-30pcs/time
15 minutes
about 3hours
Respiratory resistance
30 minutes
Bacterial filtration efficiency
30 minutes
Particle filtration efficiency
30 minutes
Synthetic blood penetration
30 minutes
Ethylene oxide residue
30 minutes
Microbial index
3 days
Microorganisms need to be cultured in a laboratory environment
Services
The seller is responsible for sending the equipment to the buyer's factory and completing the installation and commissioning of the equipment. If there is a problem during commissioning, the seller is responsible for solving the problem.The buyer must comply with the relevant regulations of the seller's installation site;


Equipment assembly training—Training of equipment personnel for the assembly and maintenance of equipment. Usually, when the mechanical assembly is performed, the buyer sends an engineer to the manufacturer to master the basic specifications, composition, characteristics, etc.



After receiving the buyer's failure notice, the seller should implement the warranty obligation, respond within 8 hours, and give a solution within 24 hours to reduce the buyer's loss. If the repair requires other accessories, the seller will assist in the procurement, installation and commissioning, and the problem needs to be resolved within 48 hours.In order to ensure the capability and quality of the device, please follow the specifications and parts and materials required for use.