Short Path Molecular Distillation Molecular Distillation High Purity Hemp Oil

Product DescriptionYMD-150 Industrial short path molecular distillation for high purity hemp oil

YHCHEM wiped film distillation system molecular dstiller, it is a process of separation, purification and concentration of natural products, complex and thermally sensitive molecules for example vitamins and polyunsaturated fatty acids. This process is characterized by short term exposure of the distillate liquid to high temperatures, by high vacuum pressure (around 1024 mmHg) in the distillation column and a small distance between the molecular distillation and the condenser around 2 cm, where fluids are in the free molecular flow regime, i.e. the mean free path of molecules is comparable to the size of the equipment. This process has the advantages of avoiding the problem of toxicity that occurs in techniques that use solvents as the separating agent, and also of minimizing losses due to thermal decomposition.

Molecular distillation process description
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
Technical drawing of the main machineSpecificationsAdvantages of YMD seriescustomized vacuum industrial distiller of essential oils
1) Low operating pressures
2) Short residence time
3) High distillation rates
4) Low fouling on distiller wall
5) Grease-less magnetic sealed bearing, valves and joints
6) Perfect for heat sensitive materials

Technical specifications of our YMD seriescustomized vacuum industrial distiller of essential oilsModelYMD-060YMD-080YMD-100YMD-150YMD-200Effective evaporation area (m2)0.060.10.150.240.35Yield at end of 8-10 hr. day (L)1-32-53-86-1510-20Barrel diameter(mm)6080100150200Feeding funnel volume1L1.5L2L2L5LFeed rate (g/h)250-500500-750750-15001500-30003000-5000Motor power (W)90120120120200Maximum speed (rpm)0-500Distillate receiving flask (L)11235Recicle receiving flask (L)11235Operation temperatureUp to 200℃Detailed Images
Details images aboutcustomized vacuum industrial distiller of essential oilsFeeding system
* Apply constant pressure dropping funnel
* Multiple entry of material
* High borosilicate glass 3.3
* Feed insulation system available
Jacketed evaporation barrel with internal condenser

* Made of high borosilicate glass 3.3 easy for viewing
* PTFE blades, which is high temp resistance and anti-corrosive
Cold trap

* The main components are fabricated in Borosilicate glass to enable observation of product properties like foaming, fouling and film distribution on the heated shell during molecular distillation.
External condenser
* Made of high borosilicate glass 3.3
*Capable of effectively condensing the gas
* Resistant corrosionCollection flask
*The receiving system can be upgraded for non-stop operation.
Customization
Factory Strong Customization Ability
As a professional manufacturer of wiped film molecular distillation with years of experience, we can customize according to clients' requirement, to help you optimize your distillation process and maximize output.

YMD-080
- External condenser for collecting Terpenes

- Diffusion pump to maximize the vacuum degree

YMD-150 with all upgrades:
- Continuous collection module (Distillate and Residue)
- Feed pump for automatic feeding
- External condenser for collecting Terpenes
- Cooling coils cold trap to replace traditional dry ice cold trap
- Diffusion pump to maximize the vacuum degree

YMD-200
- Continuous collection module (Distillate and Residue)
- External condenser for collecting Terpenes

YMD-150 Customized according to clients' need
- Continuous collection module (Distillate and Residue)- Feed pump for automatic feeding
- External condenser for collecting Terpenes, with continuous collection.
- Cooling coils cold trap to replace traditional dry ice cold trap,with continuous collection.
- Jacketed residue collection flask and jacketed distillate collection flaskRelated Products
Supporting chiller, heater and vacuum pump forcustomized vacuum industrial distiller of essential oilsVacuum pump
Model: YHX-16
Pump speed: 9CFM
Rotating speed: 1420r/min
Ultimate.partial pressure:≤4X10-4 mbar

Oil consumption:1.5Ltr
Circulating chiller for external condenser
Model: YHDC-2015
Bath Volume: 15L
Temperature Control Range: -20℃~95℃
Temperature Accuracy: ±0.5℃
Cooling Capacity: 650W
Flow Rate: 15L/minCirculating heater for feeding system
Model:GX-2005
Bath volume:5L
Temperature Control Range:RT~300 ℃
Heating Power:1.6KW
Circulate Flow Rate:8L/min
about YHCHEM
CE Certifications of YHCHEMFAQContact Us:
Shanghai Yuanhuai Chemical (YHCHEM) Technology Co., Ltd.
Contact no: +86 177 2110 1747
Skype:jackie.sun20
Address: No.96 A, Shenbei Yi Road, Songjiang District, ShanghaiWelcome to visit us!