Road Hazard Warning Light Super Flare Led Light Yellow Led Road Flares

Yellow Led Road Flares Super Flare Led Light Road Hazard Warning LightsProduct Description
1. Led Road Flares Advantages• Made of High Quality PC/TPR Housing and silicone Lens.
• Built-in On/Off Switch Control with 9 Flashing Mode
• Versatile Purposes: For traffic control, Warning Light, Emergency Beacon, etc..
• 360° Coverage with strong magnet base attaching to any flat metal surfaces.
• Great for Roof Top, Front/Rear Hood, Car Door, Motorcycle Saddlebag.
• Powered by rechargeable lithium batteries
• Applicable to Most Auto Car Vehicle Automobile, SUV, Pickup Trucks, ATV, UTV Motorcycle, Boat.2. Led Road Flares SpecificationFunction*. Rechargeable US or EU AC wall charger, car adaptor and USB wire include,
*. Can be seen 500Meter at daytime, 1000Meter at night and 10miles in the water.
*. AC wall charger input 100-240V, output 5V 500MA, fully charged within 9 to 12 hours.
3. Led Road Flares Features1. Safer and ecologically better for our environment then flame style emergency road flares. No spark, open flame, fumes or toxic chemicals are produced when using the LED road flares.2. Shock resistant construction make the warning light very durable and can withstand the impact of roadside traffic. Can even be run over by a truck and still operate. Used by fire. Police, and other emergency responders.3. Lie flat or on its edge depending on your reference. Place on the road, on construction sites, vehicle bumper or other surface, and anywhere needing emergency signaling.4. The LED road flares is waterproof and floats on water so it may be used for marine application and safely in wet environments, including submerged to a depth of 33 feet. Will float unless secured.5. Using the magnet on the back, attach to any magnetic metal surface. Place on a vehicle, fence, or other metal surface.6. LED road flares will keep a full charge for 90 days. After 6 months, it keeps 70% power; Ater 1 year, keeps 50% power; After 2 years, it keeps 40% power.

Press ON/OFF button on led road flares to select the following 9 light patterns. PATTERNRUN TIMERotate9 hoursQuad-Flash14 hoursSingle-Blink25 hoursAlternating Blinks3 hoursSOS Rescue(Morse Code)8 hoursSteady on - High3 hoursSteady on - Low15 hours2 LED Flashlight8 hours4 LED Illuminate4 hours

Operation
1. Press ON/OFF button to switch ON
2. Push ON/OFF button to select from 9 different flash patterns
3. Press ON/OFF button and hold down for 3 seconds to switch OFF
To turn off the led traffic warning light without cycling through the 9 light pattern, just press and hold ON/OFF button for 3 seconds. TWO LEDs will flash five times and then turn off. When ready to operate again, press ON/OFF button to return to the last flash pattern before turning off.
Charging
1.Put on led hazard light with front side facing up. The (+) and (-) terminal symbols will be aligned.
2.Plug 12V/24V car charger or 120V/220V wall charger into power port of charger.
3.Connect to power supply, the indicator light will light up as below.

Charging: The indicator light aside warning light turns RED and make a Green/Red alternating flash.
Fully Charged: The indicator light aside warning light stops flash and keep steady.
Note:
1.If indicator light turns red, not flashing, it means led hazard light is placed incorrectly and can not be charged

2.It is not recommended that you disassemble the led warning light. If it is not reassembled correctly, it may result in failure of the waterproof seal and damage to the unit.
4. Led Road Flares Application
Led road flares will bring you safe and secure and can be used as follows.
• 1. Fault car traffic warning
• 2. Police the road planning label
• 3. Surface buoys and maritime salvage label
• 4. Heavy vehicle transport warning
• 5. Outdoor lighting
• 6. Camping or hiking routes identification
• 7. Rescue operations identification
• 8. Emergency or temporary runway label
• 9. Emergency vehicles to be found, such as ambulance, helicopter landing zones urgently.
5.Product PhotosPackaging & ShippingOur ServicesCompany InformationFAQ
1. Q:Are you a factory or trading company?
A:As a factory, we are specialized in manufacturing led road flaresformany years.

2. Q:Can you print client's logo?
A:Yes, we can do that and we can provide OEM customized logo/package.

3.Q:How can I get a sample to check your quality?
A:After product prices are /confirm/ied,samples can be sent for quality checking.We will issue proforma invoice to you,samples will be delivered to you in 3-5working days after you pay.

4.Q: What quote do you offer?
A: FOB, CIF and others ways according to your needs. When the quality is same, our price can be more competitive.

5. Q:How to pay?
A: We accept payment by T/T, L/C, Western Union etc.
6.Q:Do you provide after-sales service?
A:Yes, please kindly contact us at any time.