fire service protective suit for fire fighting emergency rescue

fire service protective suit for fire fighting emergency rescue
Product Description
Product Namefire service protective suit for fire fighting emergency rescue MaterialNomex ColorNavy blueOuter shell100% aromatic polyamide 100%LiningE-PTEE fabric materialWeight≤3kgSize170,175,180,185,190FeatureFlame retardantFunctionHigh temperature resistanceApplicationFirefighter fire protectionCertificateGA10-2014 / CCC
Introduction:
The garment is a lightweight fire-fighting protective suit consisting of an outer layer, a waterproof and breathable layer, and a comfortable layer of three layers. It has fireproof heat resistance, waterproof and breathable, antistatic properties, and overall thermal protection performance TPP>32cal/cm2. In line with the GA10-2014 "Firefighter Fire Protective Clothing" standard, CCCC mandatory certification (Certificate No.: 2016081808000237), obtained the national fire equipment quality supervision and inspection center test report (certificate number: Zb2015Z0177). Can be customized according to the "17 type firefighter fire protective clothing style identification type requirements (provisional)".
Fabric:
Outer layer: 78%Conex,20%Technora,2% ANTI-static fiber.
Waterproof and breathable layer: Aramid non-woven fabric + flame retardant PTFE film.
Comfort layer: 87% Conex, 5% Technora, 2% ANTI-static fiber, 6% high performance flame retardant fiber.
Product Features:
1. Non-detachable integrated design
2. Elbow, reinforced at the knee, the material is 50% meta-aramid, 50% para-aramid coated flame retardant silicone
3, tool pockets on both sides of the hem, with leaking holes at the bottom of the pocket
4. The front chest, hem, cuffs, and trousers are provided with a 3M reflective tape and micropores, 360. It can be seen that the micropores increase the air permeability of the clothes.
5. Over-shoulder seams, sleeves and seams, reflective strips at the seams of the trouser legs, especially when the light is insufficient.
6. Reflective tape, pendulum seam, front seam joint, rear seam seam, access control, sleeve joint seam, trousers seam, trousers seams are double needle sewing, sewing thread is aramid thread, ie high temperature and flame retardant
7. The sleeves are naturally bent to match the curve of the human arm.
8. The elastic strap is made of flame-retardant, strong-stretch webbing, which is adjusted by Velcro and Japanese buckle.
9. The cuffs have aramid flame retardant threads and have a thumb hole design.
10. The foot has a short front and a short design, and has a tightening device to facilitate wearing protective boots to prevent the clothing from being damaged due to the pedaling.
Company Information
Advantages
Exhibitions
FAQ
Certifications
Contact Us
fire service protective suit for fire fighting emergency rescue