Ventilator

Display: 10.4''LCD Display Following Parameters & Real time waveform display Operating mode and respiratory rate; ——Ventilator control frequency set by medical staff; ——Tidal volume of each breath in the patient; ——Occurrence of spontaneous breath in the patient and spontaneous breathing frequency; ——Expiratory phase and inspiratory phase and actual respiratory rate;
Physical specifications
Display
10.4'' LCD Display
Mode:
pneumatically powered and electrically controlled system
Trolley:
Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisions.
Technical Specifications:
Gas requirement:
Medical oxygen and nitrous oxide with a pressure ranging from 280~600kpa
safety valve
<12.5 kPa
Respiratory Rate
1 ~ 99 bpm
Oxygen Concentration
21% ~ 100%
Maximum Minute ventilation
≥18L / min
modes of ventilation
A/C, IPPV, SIPPV, IMV, SIMV, PEET. MANUAL, SIGH, SPONT
Ventilator compliance
≤30 Ml/kPa
PEEP:
0 ~ 1.0 kPa
Ptr:
-10 ~ 10 hPa
IMV frequency:
1~20 bpm
I/E Ratio:
4:1~1:4, Has the inverse ratio ventilation
Tidal Volume
Setting Range: 50~1500ML Display Range: 0~2000ml ; resolution ratio: 10ml
Inspiratory Plateau:
0~1s
Maximum Safety Pressure
≤ 6.0kPa
Sigh:
one deep breath per 80 controlled respirations, the inspiration time is 1.5 times of the setting point
Pressure limit range:
1.0~ 6.0kPa
Airway pressure alarm: Audible and visual and with yellow and red color indicating
Lower: 0.1 kPa ~ 6.0 kPa; Upper: 0 ~ 5.0 kPa
±0.2 kPa
Ventilation Volume alarm:
≥ 18L/ MIN
Power Supply Alarm
Ac/dc power supply are after failing to send out alarm immediately
Alarm Time: keep >120s
The airway pressure continues to be higher than 15 hPa ±1 hPa for 15s±1s, then the machine will raise an audible alarm, the pressure will be displayed in red and the continuous high pressure red alarm wording is displayed on the screen of the anesthetic respirator.