Product Description
Application of Long life time hard metal cemented tungsten carbide wire drawing dieCemented carbide wire drawing die as a tool material has been increasingly used for cutting tools, wear-resistant tools, impact-resistant tools, and other products with special purpose. Cemented carbide was first used in stretching mold area and has gone though cast iron mold, alloy steel mold, diamond dies, cemented carbide dies, polycrystalline module die and other developmental stages. With the property of high wear resistance, good polishing performance, low friction coefficient, etc., cemented carbide drawing die has been a substitute of steel mould which is used to stretching steel and non-ferrous metal.Grades for tungsten carbide drawing dies
Grade Density (g/cm3) Hardness
(HRA) TRS
(MPa) Average Grain Size
(um)YL01 15.25 93.5 33000.8YL10.2 14.5 92.04000 0.8 YG6 14.9590.0 2400 1.6 YG6X 14.95 91.5 1900 1.0 YG8 14.75 89.5 2800 1.6 YG11 14.487.5 3100 1.6 YG15 14.05 87.0 3000 1.6 GradeApplication RecommendedYL01Used sor drawing diameters less than 1.5mm of steel, tungsten and molybdenum wire under high speed
drawing as well as nonferrous metals with high requirements on surface finish.YL10.2Used sor drawing diameters between 1.5mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirements on surface finish.YG6Used sor drawing diameters less than20mm of steel, nonferrous and its alloy wire or bar under a mede- -rate stress. It's also used for tubes less than diameters of10mm.YG6XUsed sor drawing diameters less than20mm of steel, nonferrous and its alloy wire or bar under a mede- -rate stress. It's also used for tubes less than diameters of10mm.YG8Used sor drawing diameters less than 50mm of steel, nonferrous and its alloy wire or bar under a mede-
-rate stress. It's also used for tubes under35mm.
YG11Used sor drawing diameters less than 60mm of steel, nonferrous and its alloy wire or bar under a mede-
-rate stress. It's also used for tubes under35mm.YG15Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress.
Product Show
Product Uses
Company Information
Our Services
1.We provide quality promise worldwide for any part of the tungsten carbide products ( best equipment + accurate machine checking and test ).
2.We provide reparing service with low cost for any machine over the warranty period.
3.We provide 24 hours pre&after sail service for any customer,pls contact our email and
Aliwangwang to get the immediate response.
4.We provide OEM service for business channel or educational institution.
Packaging & Shipping
Packaging
1. Firstly wrap with paper or PP film,then put into plastic box or paper box, finally into carton or wooden case. Standard export packaging.
Shipping
1. FedEx/DHL/UPS/TNT for samples,Door-to-Door;
2. By Air or By Sea for batch goods,for FCL; Airport/Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods;
4. Delivery Time: 5-10 days for samples; 15-35 days for batch goods.
FAQ
If you have any others questions, please contact us and we will give you prompt response!Q: Are you trading company or manufacturer?
A: We are factory?Q: What is you mainly products?
A: The mainly products including carbide saw tips, drawing dies, cold heading dies, carbide buttons and hammer stone, drill bits, etc.Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free change but do not pay the cost of freight.Q: What about your general delivery date?
A: Normally the delivery time is 7-15 workdays.Q: Do you have gurantee on your products?
A: Of course! we gurantee the goods produed is same as ISO 9001:2008, or samples, drawings confirmed by you.
Contact us