pcb printing machine stencil printer screen and solder printer machine

manual precise pcb silk screen smt stencil printer machineProduct features:(1).This machine is mainly designed for requirements of single or double-sided circuit board solder cream or red glue printing.(2).Universal honeycomb plate, movable thimble, movable supporting block, flexible positioning PCB, convenient to print double-side PCB.(3).The base uses thick plate and forming welding, strong solid and wear well.(4).Circuit board positioning adopts positioning needle, fixed rod and fixed plate for positioning, which can ensure convenient positioning and accuracy of repeated operation.(5). High resolution ratio CCD Industrial camera(6).Make ready mode is made through stencils movement and combined with fine adjustment and correction of X and Y axis in printing platform, which is convenient and quick.(7).Steel mesh stent uses spiral screw, can be adjusted up and down, convenient to control PCB thickness and the quantity of printing solder paste.(8). Printing screw board fixed by four rotary knobs with pressure plate.Product Description
Service
We provide related products
System
PLC
Screen
YES
Signal line
SMEMA
Features
If you want get more information. Just contact me.Company profile
FAQ
1) What should be paid attention to when printing solder paste?You can understand the principle of this printing station at a glance. If you have a bad brush, you can check it from the following aspects.

1. Whether the solder paste has been left too long and too dry. In this case, you need to add some thinner and stir it evenly.
2. Check whether the positioning pin is higher than the circuit board surface. Lift the board up and the steel mesh does not fit the board. There are hidden small screws on the side and bottom of the positioning seat to adjust the height of the positioning pin.
3.When you scraping tin. Pls pay attention to the method and try not to scrape repeatedly. Generally, the angle between the scraper and the board is normally around 45°. And the intensity should be appropriate and scrape once.


2) Can the printing angle be adjusted?
There are adjustment knobs on the right and front of the printing table, 1CM in vertical and horizontal directions and the knobs on both sides cooperate to adjust to achieve the angle adjustment of the table.


3) Can printing press be painted with red glue?
Yes, the opening position of the steel mesh of the red glue brushing process is different from that of the solder paste. The opening position of the solder paste process is on the pad and the opening position of the red glue process is the center position of the component.Recommend Products