Roofing Sheet Nu-Wave Corrugated Metal Roofing and Siding Forming Machine

Nu-Wave Corrugated metal roofing and siding is a classic exposed fastened metal panel suited for siding and roof applications. The profile is as below.
Main parameters:
Material thickness: 0.3-0.6 mm
Working speed: 8-12 m per minute
Processing material: color coated steel plate, galvanized steel plate
Characteristics of the machine: base is made of high tensile strength H beam with precision welded and good rigidity; shaft, rollers and all components are manufactured precisely to have long lifetime; efficient design and easy maintenance.
The work flow of roll forming production line.
5T Manual Decoiler
Decoiler
Work type: passive type
Structure: Steel channel welded for the basic frame
usage:To support the coil and make the uncoiling
Loading capacity: 5 tons
Inner diameter: 450-550mm (manual adjustment)
Coil width: 1050mm
Brake system: manual brake
The Main Forming Machine
Roll forming machine
Feeding device
One set guiding roller
Steel plate welded platform to carry the sheet and feed into roll forming system
Feeding width is adjustable with the handle wheels
Rolling shaft
Shaft material:45# STEEL
Shaft diameter: 75 mm
Tempering treatment to prevent deformed and improve hardness
Roller
45# steel
Chromed treatment, improve the hardness and prevent abrasion, anti corrosion increase of service life
Rolling station
16 rolling stations
Work speed
8-12 m/min
Machine structure
Steel plate welded structure
Machine basic frame
350# H steel welded
Work power
4.5 kw
Rolling spacer
Anti rusty treatment
Pull rod
Anti rusty treatment
Transmission
By Chains with cover
Noted: please fill the lube in case the chains getting dry
PLC Control System
Control system
Frequency brand
Delta (original)
PLC brand
Delta (original)
Frequency brand
Delta (original)
Screen type
Touch screen, also have buttons on the panel
Screen language
English/Chinese
Cut command
Yes
Profile length set-up
Yes
Batch quantity program
Yes
Low pressure electric part
Schneider brand
Encode
Omron brand
Tip
please do the waterproof and damp proof work well if the machine is not used for a long time
Please restart the machine and try all the functions each two weeks, to prevent the electrical parts getting aging
Remark
Support multi orders input,ensure the machine can work continuously according to different request without stop
All the electrical parts are branded with a high quality, it can be fixed easily if damaged. Because you can find these again in any area of the country and it’s a standard parts.
Hydraulic Cutting System
Cutting system
Work type
Hydraulic cutting
Driving method
By pillar type Cylinder
Cutting device structure
Pillar type
Noted: please fill the lube before start the machine the first time
Hydraulic motor power
4 kw
Hydraulic oil
Hydraulic oil number: 46#
Quantity: around 100 Litre
Maintain: change the hydraulic oil every 2 years
Cooling method
Equipped with fan on the tank, in case the oil temperature getting hot when the machine working for hours continuously, ensure the hydraulic oil in a constant temperature to have enough power for cutting device
Cutter material
GB-Cr12 with heat treatment
Cutting length tolerance
±1mm/3m
Cutting feature
Steady and safe working condition
Oil tube and wires connection
All the tubes and wires will be marked by the numbers or letters,
So that it will be very easy to connect for the new.
Remark
If the production quantity is large, we suggest the client prepare the one set spare cutter, the spare cutter will cost USD280 one set, the original cutter can be grinding then use again.
It’s better that stop the machine for 30minutes every 4-5 hours, if the temperature is high.
If the weather is cold, please start the pump first for 5 minutes to heat the hydraulic oil, then do the cutting work.
Product Table
Product table
Length
3 meters
Width
1.25 meter
Material
Square pipe welded
The table will be put in front of the machine to receive the sheets. There are 6 passive rollers on the table, to convey the sheets when the sheets come out from machine after cutting
Duo to the cutting length of the sheet, we will provide two sets table along with the machine, the customer can place the table in front of machine as production request
Payment Term and Warranty
1.Payment terms:
-30% by TT for the advance payment at order
-70% by TT after inspection in China
2. Delivery: Max.45 working days after the advance payment.
3. Validity time: 15 days since the quote date.
4. After-sales service
A: Warranty: One year ,and we will provide the technical support for the whole life.some spare parts are available.
B: Training and service: the buyer should charge of visa, round-trip ticket, food and accommodation overseas and USD80/person/day for salary. Also need the buyer arrange some workers to help our technician for installation and commissioning
C. The advantage of my factory: we have a team of skilled engineers and one group for after-sale service.
D: we will provide you the layout for installation in English.