Cemented Carbide Brazed Tips Cemented Carbide Brazed Tips Cemented Carbide Brazed Tips

Size of tungsten carbide blazed tips , and Customization is available.
Grade & Application of cemented carbide brazed tips
ISO Code
Grand
Physical and mechanical properties
Applications recommended
Density g/cm3
Hardness No Less Than HRA(HV)
TRS No Less Than (Mpa)
K05
YG3
15
90.5
1300
Suitable for finishing of cast iron and nonferrous metal.
K10
YG6X
14.8
91
1560
The finishing& semi-finishing of cast iron and nonferrous metals and also for the machining of manganese stell and hardening steel.
YG6A
14.7
91.5
1510
K15
YG6
14.9
89.5
1670
Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
K20
YG8
14.6
89
1840
Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
M10
YW1
13
91
1290
Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel
YW3
12.9
92
1390
YW4
12.3
92
1390
M20
YW2
12.9
90.5
1460
The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the maching of railway wheel hubs.
P10
YT05
12.6
92.5
1260
Suitable for the finihing and semi-finishing if steel and cast steel with a moderate feed rate and a rather high cutting speed.
YT15
11.3
91
1300
P20
YS14
11.4
91.5
1550
Suitable for the finishing and semi-finishing of steel and cast steel. YS25 is specially used for the milling of steel and cast steel.
YT14
11.4
90.5
1400
YS25
13
90.5
1780
P30
YT5
12.8
89.5
1560
Suitable for the heavy duty rough tuming of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions.
K05-K10/M20
YT26
14
92.5
1600
Suitable for fine and semi-finishing machining of chilled cast iron and non ferrous metals with good performances of the mosetting and wear resistance, also suitable for turning and milling of manganese steel and hardened steel.
K20
YD201
14.9
91
1800
Suitable for semi-finishing and the rouhhing of cast iron and light alloys ans also for the milling of cast iron ans low alloy steel.
M05-M10
YS8
13.9
92.5
1720
It can be used for the finishing of iron based ans nickel based high -temperature alloys and high -strength steel and it can also be used for the finishing if chilledcast iron, heat resistant stainless steel, high manganese steel resistant stainless steel, high manganese steel and hardened steel.
M10
60
12.8
92.5
1500
Mainly used for threading of petroleum pipe, also used for fine machining of hardened steel.
M20
YM20
13
91
1750
P30
YC30S
12.9
90
1600
Used for the milling of steel, cast steel ans alloy steel.
P35-P40
YC40
12.9
91
2200
Suitable for the heavy duty turning of steel and cast steel with a big steel rate under unfavorable working condifion.
P40
YM40
12.75
90
2100
Suitable for the heavy duty turning of steel and cast steel with a big steel with a big steel rate and also for face milling.
YC45
12.75
90
2300
Customer NOTICE:
To save your value time, please inform us of the following information:
1, Grade
2, Type
3, Dimension for each type
4, Blanks or finished products
5, If you have any special requirements of the products, pls send us in advance. We will satisfy you as much as we can.Company Information
about Zhuzhou Jintai
Except for cemented carbide brazed tips, We are spplying following other items
Tungsten Carbide Plates
Tungsten Carbide Strips
Tungsten Carbide Disc Cutter
Tungsten Carbide Balls
Tungsten Carbide Inserts
Tungsten Carbide Tips
Tungsten Carbide Rods
Tungsten Carbide Cutter Blades
Tungsten Carbide Coal Drilling Blades
Tungsten Carbide Teeth Balls
Tungsten Carbide Road-digging Teeth
Tungsten Carbide Drawing Dies
Tungsten Carbide Rollers
Tungsten Carbide Tungsten Carbide Buttons
Tungsten Carbide Tire Studs
Tungsten Carbide Non-standard Special-shaped MouldsPackaging & Shipping