1100-Straight line-double side-lock bottom-46 corner Folding Gluing Machine

1100-Straight line-double side-lock bottom-4&6 corner
Folding Gluing Machine
1. Characteristics:
1.Driving by V-ribbed belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor ,to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
7.The machine is configured with remote control,Remote troubleshooting, update the program.
2. Main technical parameter:
Model
ZH-BH1100-4&6
Suitable material
Card board210gsm-800gsm,E,F,N flute corrugated board
Max method
Automatic continuous feeding
Max mechanical speed
400m/min
Overall dimension
16800*1700*1900mm
Weight
8.8T
Glue type
Cold glue
Power consumption
27KW,380V 50HZ
Compressed air
6 bar,10 m³/h,60 L
Inching speed
10 m/min
Machine configuration
Main motor
Siemens
PLC
LS -South Korea
Three Inverter system
LS -South Korea
Two Touch Screen
LS -South Korea
Feeder belt
NITTA Japan
Drive Bearing
NSK Japan
Ribbed belt
Hutchinson (France)
Plain belt
NITTA Japan
Circuit Breaker
Schneider
Rely
Schneider
Button
Schneider
Switch power supply
Schneider
Photo Switch
Panasonic
One Servo motor(control feeder)
VMMORE CHINA (the software from Germany)
Glue spray
KQ CHINA
Double side wall
Double side 20mm
Folding section
Fold section up belt control by shaft, running E/F/N flute more easy.
3. Feature:
1.Feeder Section
Adjustable electronic pile vibrator.Feeder section equipped with three pieces feeding knife, adjust the asymmetrical lengths as per the box sample.
Side feed gates fully adjustable to the width of the blank.
Configure the servo motor to control the feed.
feeder section with vacuum
2.Paper Alignment Section:
Independent section with an unparallel lower carrier that guides the box to a parallel handrail that allows a perfect blank alignment.
Pressure can be adjusted up and down to accommodate different paper board thickness.
The guide rail control by motor
3.Pre-fold Section:
The pre-fold section has the advantage to make the box more plain and easy to open,even in some case the scoring is not very well,easy for automatic packing production line .
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding set up to 165º.
1st and 3rd crease openers.
The guide rail control by motor
4.Bottom Lock Section
Complete set of folding hooks and helixes to fold the front flaps of the blank smooth and accurately.
Set of accessories for B-type lock bottom.
The guide rail control by motor
5.Down glue
Tow lower gluing tank
Easy to remove and clean.
6.4&6-corner device (Back fold Option)
Motorized and untimed electronic back folding system with intelligent servo motor technology.
Servo-motor of back folding device
Two driven shafts allow a precise fold of the rear flaps. Easy to setup through the main touchscreen.
7.Folding Section
Smooth and accurate folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º
The guide rail control by motor
The up belt control by shaft, it’s more easy to do E/F/N flute.
8.Trombone Section
Upper and lower drive mechanism for lengthwise adjustment.
Equipped with automatic belt tension-adjusting system.
Continuous and automatic box collection mechanism that ensures a neat transfer to the Press section, guaranteeing a well aligned flow.
9.Press section
Manual and Automatic speed variation in coordination with a photocell.
Upper section moves back and forward, adaptable to different box lengths.
Pneumatic pressure adjustment
10.Squaring section
Motorized and pneumatic squaring device on press section.Two carriers with transport belts allow a perfect flow of boxes moving to the pressing station.
Rear stack corrector, that allows to square the boxes while falling on the lower conveyor.