Hot-melt reflective Road surface marking paint making machines

Hot-melt reflective road surface marking paint making machines
1. Road marking paint mixing equipment is fast speed mixing , stir with multi-layer spiral belt , overall movement of materials, high speed and high yield, the average mixing time is 5-10 minutes.
2. Multi-usage, can produce solvent at room temperature, heating solvent traffic coatings road marking paint, hot melt type reflective road marking paint, spike type vibration reflective marking paint, water-based reflective road marking paint, etc
3. Low maintenance rate, bearing on both ends of the mixer, materials are not easy to enter, equipped with reducer and maintenance rate.
4. High mixing uniformity, multidirectional movement of materials, multi-layer spiral belt, stirring without dead Angle, high uniformity and good quality;
5. Small footprint, automatic feeding device, improve work efficiency.
6. U-type/O type tube structure, stable operation, low noise, long service life and wide application scope;
7. Use the inner and outer layers of the inner shell to bring back stirring, no dead Angle, fast mixing speed and high evenness;
8. The marking paint mixer adopts the screw lifting/gladiator to raise the material, the feeding port and the ground level are smooth, the feed is convenient;
The mixer is mainly composed of spiral feeder, ribbon mixer, oil filling pipe, oil filling system and pneumatic valve mouth packing machine
1. Good dispersion: the design of spiral ribbon structure is adopted in the marking paint mixer, which can effectively disperse various raw materials and completely solve the problem of segregation caused by the different proportion of materials.
2. Wide application: the marking paint mixer can meet the production of different marking coatings
3. The equipment investment is less, the benefit is high, and it avoids the idle and waste of equipment caused by over-investment.
4. The equipment is simple to use convenient, reticule coating mixer has the cover an area of an area small, low energy consumption, easy operation, without foundation can be installed directly use of the advantages of production 2-8 tons per hour, operators 2-3 people.
1.20GP,40HQ standard exporting container
2.FCL:Wire cables are used for fastening the machine on the trailer or inside the container.
Cork wood are placed in front or behind the machine to protect it.