Hot-melt road marking paint mixer thermoplastic road marking paint powder mixer production line

Hot-melt road marking paint mixer thermoplastic road marking paint powder mixer production line
1. Hot-melt water-based reflective paint production line with uniaxial no gravity mixing machine ,stir with multi-layer spiral belt , mixingspeed is fast , overall movement of materials, high speed and high yield, the average mixing time is 5 -10 minutes;
2. Multi-usage, can produce solvent at room temperature, heating solvent traffic coatings road marking paint, hot melt type reflective road marking paint, spike type vibration reflective marking paint, water-based reflective road marking paint, etc;
3. Low maintenance rate , the bearing on both ends of the mixer, materials are not easy to enter, reducer equipped with low maintenance rate;
4. High mixing uniformity, multidirectional movement of materials, multi-layer spiral belt, stirring without dead Angle, high uniformity and good quality;
5. Small footprint, Artificial or automatic feeding device according to customer demand, improve work efficiency;
6. Uniaxial no gravity mixing machine structure, stable operation, low noise, long service life and wide application scope, no dead Angle, fast mixing speed and high evenness;
7. The marking paint production line adopts the screw lifting / bucket elevator to raise the material, the feeding port and the ground level are smooth, the feed is convenient.Specification and performance parameter list
ModelCapacityTotal PowerWorkshop AreaWorker Required
Hot-melt reflector line paint production line is mainly composed of stirring main engine,finished warehouse,screw conveyor,batching weighing silo,bucket elevator,steel frame structure,filling oil system,pneumatic valve mouth packing machine,raw material silo,electric control cabinet .the equipment are main part of hot-melt reflector line paint production line,Can be equipped with high efficiency dust removal and other related equipment according to customer requirements.
1. Good dispersion: the design of spiral ribbon structure is adopted in the marking paint mixer, which can effectively disperse various raw materials and completely solve the problem of segregation caused by the different proportion of materials.
2. Wide application: hot-melt reflector line paint production line can meet the production of different marking coatings
3. The equipment investment is less, the benefit is high, and it avoids the idle and waste of equipment caused by over-investment.
4. The single shaft non-gravity mixer is used to quickly stir and uniformly, with high precision automatic measurement, batching and oil injection device.Automatic weighing air flow valve mouth packing machine greatly improves working efficiency.
1.20GP,40HQ standard exporting container
2.FCL:Wire cables are used for fastening the machine on the trailer or inside the container.
Cork wood are placed in front or behind the machine to protect it.
Customer inspection
Contact us