Product Introduction
SZHINO series medical isolating transformers, which have good output features and interference resistance capability, are made of high quality cold rolling silicon steel sheets in a seamless rolling way; comparing with the lamination type, the excitation energy and iron core loss will be decreased by 25%. The iron core doesn’t have air gap, so the noise due to iron core induction vibration; due to little iron loss and good the heat radiation of winding on the lower temperature iron core, the transformer temperature rise is low. The transformer iron core doesn’t have air gap, so the winding is even, the magnetic interference is low, and this kind of structure makes the magnetic-flux leakage and the electromagnetic radiation low, and can be used to electronic equipment with high sensitivity without adding shielding additionally, for example, it can be applied to medical equipment. The overall size is small; comparing with that of the traditional transformer, the weight is decreased by a half; the overall size if flexible.
Characteristic Curve
Technical ParametersYou can buy a complete set of medical isolated power system from our company, which includes the following five components:
1. Insulation monitor
2. Medical isolation transformer
3. Special power supply
4. Current transformer
5. Remote alarm terminal
Q1: What should I pay attention to when I order the isolation system?
A1: You should tell us what devices you need, the separate parts or an assembled isolation power system cabinet consisted of the five parts. You should make sure the type of the transformer as there are single-phase transformers and three-phase ones. Usually, it is single-phase.
Q2: How much is the cabinet and assembly service?
A2: We have assembled the five parts in a cabinet, and you can use it only by connecting the incoming line switch to the outgoing line switch. It is very convenient. The cost of cabinet and the assembly service cost is cheap.
Q3: Where should I install the remote alarm terminal?
A3: You can install it in the case or the nursing station.
Notice:
Our cabinet case can be customized. Please pay attention to the 3rd question above and tell us the cabinet length, width and height if you order the case, so we can make the correct case for you.
Q4: Can I have OEM service or to be the distributor?
A4: Yes. If you want to get more information you can contact us.
Q5: How long is the order time?
A5: about 2 weeks.