Product Inrtoduction
Product Introduction
The armor wrap structural material is a fiberglass fabric strip with black polyurethane resin. When applied properly, it will solidify into a tough composite. It’s design for mechanical stiffening and protecting of cables and splices.
Features:
Water curing
Solidify into composite within 10 minutes with water
Withstand 150℃ after solidify
Good adhere to PE,PVC, metal, fiberglass and contrete
Resistant to most of the chemical solvents and fuel
High hardness, high strength, abrasion resistance
Non-toxic, no stimulation, no smell
Quality guarantee period: 30 month
Technical Properties:
Property
Testing method
Typical data
Impact toughness
GB/T 1043-1993
≥30kJ/mm2
Tensile strength(Longitudinal)
GB/T 1447-1983
≥12MPa
Tensile strength(Transverse)
GB/T 1447-1983
≥32Mpa
Interlaminar strength
GB/T 2791-1995
≥15N/25mm
Compression strength
ASTM F 1536-95
≥300N
Related information:
The product is supplied as rolls of specified dimensions. Recommend to store in the original packing, protected from moisture, dust, heat and sunlight.Main Parameter Two Minutes
Set Time:
20 minutes
Maximum Use Temperature:
300°F (149°C) Dielectric Strength: 300 volts/mil at 0.15 cm
Volume Resistivity:
1 x 1012 ohms/cm
Density:
18.5 lb/gal (2.2 gm/cm3)
Compression Strength:
12,000 psi
Tensile Strength:
6,000 psi
Modulus of Elasticity:
6 x 105 psi
Lap Shear Strength (steel):
900 psi
Izod Impact:
0.3 lb/in (notched)
Hardness (Shore D):
80Product Figure Photos
Packaging & Shipping
Payment
Company Information
FAQ
Our Services