Technical Parameter Coverage Data
The coverage data is as below ,it is for your reference, the real data depends on your own requirements.
--1st time to coat on the concrete floor to make the floor smooth at the same level ,with the thickness of 1mm,1m2=0.15KGS
---3D Stickers, the max width is 3m,the length is limitless ,we can print the images or pictures as your supply to us
---2nd time to coat on the 3D stickers to ensure the stickers fix completely on the concrete to avoid peeling off after a period of time,with the thickness of 1mm,1m2=0.75KGS
---with the thickness of 1mm,1m2=0.15KGS
Notes: You can adjust the thickness to your own requirements. ItemThickness Coverage DataRemark Epoxy Primer 2mm0.9kgs/m2Coat twiceCoat twice /1m2With max width os 3m3D Stickers 1mm0.15kgs/m2Coat 1 time
How to use
How is a 3d epoxy floor coating installed?
Apply the self-leveling epoxy primer. Install the 3D floor mural. If the basis of the pattern chosen is 3D floor mural, make sure bonding to the substrate was nowhere folds or creases. Install 2 layers of clear epoxy or more often, polyurethane to build a transparent layer of epoxy coating over the 3D floor mural.
Warm prompt
One:what reason is glue occurrence does not stick and do not cure?
Answer:this type of glue must be in accordance with its ratio, and it is the electronic weight ratio, not the volume ratio. Also, look at the temperature. If it's too cold, it's recommended to heat it up to 25 degrees before stirrig.
Second: we do not have vacuum equipment, how to defoaming?
Answer: dear, there is no vacuuming equipment no matter, our glue is natural defoaming, glue thoroughly after mixing, stationary 5-20 minutes, can automatically defoaming.
Three: why is our glue seven days old and still not solidified?
Answer: if the product is hard glue for 3 days and soft glue for 7 days and still does not cure, 1. Please check whether the ratio is based on weight; 2. 2. Whether the stirring method is correct or not. Considering environmental protection and safety, the curing agent is water-based, which is as thin as water. 3. If you can confirm that there is no problem with 1 and 2, then this is very important. The proportion of A component +B component of the primary glue should be more than 50 grams, and the proportion must be weighed by electrons.
Four: glue mix mix which component first pour?
Answer: when mixing this product, please pour glue B into the blender, and then pour glue A.
Five: I still don't understand what to do?
Answer: then please contact our customer service, we are ready to serve you 24 hours a day.