Introduction:
Heat plates utilise high compressive strength extruded polystyrene insulation, with highly efficient aluminium heat plates. this acts as a heat conducting surface to transfer the heat from the pipes to the finished floor above. Floating heat plate system is available in 30mm,and it is suitable for wood floor coverings fitted directly above and carpets with a 22mm chipboard.
Size: 1200*600*30mm (L*W*H)or customized
Grooving line Size: 16mm&20mm
Material:XPS Foam Board with grooving line
Temperature limited: -50.C,+75.C
Water absorption: ≤1%
Compressive strength:≥ 300Kpa
Thermal conductivity: ≤ 0.027W/M.K
Color: Blue/Yellow
Fireproof grade: B2
CFC HCFC Free; HBCD Free; ECO Friendly
Detailed Images and Installations:
*1.The ground must be flat and clear, tape the boundary strip *2. Laying boards*3.Cut some necessary small pcs to fit the empty space between floor heating grooved XPS panel*4.Use aluminum tape to tape the space between each aluminum plate*5.Fit pipes into grooves.*6.Laying the wooden floor,and try to avoid the seam between the wooden floor