maquina de soplado de pet

maquina de soplado de pet
High speed PET blowing machine
1) Technical Parameter:
Items
General Information
JG-6-700Machine Construction
One set Automatic Blow unit with Preform auto-loader
Theoretical Output
5500pcs/hr
Max.container volume
700M L
Max.neck diameter
50mm
Max.container diameter
100mm
Max. mold height
240mm
Moving stroke
100mm
Number of cavity
6 Cavity
Electrical System
Temperature control zone
7 zones
Total heating power
70kw
Air System
Working Pressure
1.0Mpa
Low Pressure Consuming
2000L/min
Blow Pressure
≤4.0Mpa
High Pressure Consuming
3400L/min
Chiller Water
Operating Pressure
0.8Mpa
Temperature
10-12°C
Flow Rate
45L/min
Machine Data
Machine Dimension
4.45x2.42x2.0M
Machine Weight
4000kg
Preform loader size
2.0x1.05x2.6M
Preform loader weight
200kg
2)Main configuration:
1.
PLC
Japan MITSUBISHI
2.
Touching screen
Japan MITSUBISHI
3.
Operation valve
2-position-5-way, Germany BOSCH& Rexroth
4.
Blowing valve
5.0Mpa high-pressure valve, Swiss Parker
5.
Operation cylinder
Japan SMC
6.
Stretching and sealing cylinder
Japan SMC
7.
Clamping cylinder
Japan SMC
8.
Temperature controller
Japan SMC
9.
5.0 High pressure blowing valve
Swiss Parker 5.0
10.
Circuit breaker, air switch
French Schneider
11.
Photoelectric detector
Japanese OMRON
3)Operation Step:
The standard operation of automatic stretch blow molding machine includes four steps as follow
Step 1. Put the preform into preform container and the conveyer will take the preform to orientation units automatically.
Step 2. Load the preform at neck up to preform holder, and then preform is conveyed into baking tunnel.
Step 3. After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.
Step 4. The finished bottle is taken off by automatic discharging system
4) Component part