CE ETL EN60601 Medical Standards Open Frame Medical Power Supply 140W 200W 33V

Open frame Medical Power Supply 140W 200W 33V For Ventilator
Product Description
Features:
1,200W Switching power supply with High efficiency, low temperature rise;
2, 33V 200W SMPS with Built-in filters, low output noise;
3, 33V PSU 200W with Wide range of AC input voltage;
4, 200W SMPS with Short circuit, overload, over-temp. protection; ParameterItem NoKPSP200-24KPSP200-33KPSP200-36KPSP200-48Output
Output Voltage+24V+33V+36V+48V
Rated Current8.5A4.55.6A4.2A
Current Range0-8.5A0-4.5A0-5.6A0-4.2A
Rated Power(with cooling fan)201.6W201.6W201.6W201.6WRated power(without cooling fan)140W140W150W150W
Ripple200mVp-p280mVp-p300mVp-p300mVp-p
Adjustable Output Range
21.6-26.4V29.6-36.3V34.2-37.8V45.6-50.4V
Output Accuracy
±1%
Line Regulation
±0.5%
Load Regulation
±0.5%
Set up,Rise,Keep up time
800ms, 30ms, 16ms/115VAC 300ms, 30ms, 50ms/230VACInput
Input Voltage Range
88~264V AC,100~370VDC
Input Current
0.4A/115V,0.2A/230V
Input Frequency
47~63Hz
Efficiency90%94%94%95%
Inrush Current30A@230V
Leakage Current
<0.3mA@240VProtection
Over Load Protection
105~150%,Hiccup,automatic recovery
Over temp. Protection
when TS1 position>105 degree,it will be protected,then automatic recovery.
Environment
Working Temp.,Humidity
-20~70℃,10~90% RH,No condensation
Storage Temp.,Humidity
-20~85℃,10~95% RH
Temp.,Drift
±0.03%/℃(0~50℃)
Vibration
10~500Hz, 2G 10min /1cycle, PERIOD FOR 60min EACH AXES
Safety&EMC Standards
Safety Standards
GB4943,EN60950,EN62368-1,EN60601
Withstand Voltage
I/P-O/P:4kv,I/P-FG:1.8KV,O/P-FG:0.6KV DC 1min
Insulation Resistance
I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms
EMC Standards
GB9254,EN55022 CLASS BOthersDimension
101.6*50.8*27mm(L*W*H)Weight0.3kgNotes
1. All parameters 230VAC input, rated load, ambient temperature 25 ℃, measured under conditions of 70% humidity;
2. Accuracy: includes set up tolerance, line regulation, load regulation and so on;
3. Ripple Test: 30cm long strands connect the power supply and the load on the load side and 0.1u and 47u capacitor to 20MHz oscilloscope measured at the load end;
4. Line regulation: at rated load conditions, the input voltage changes from low to high measured;
5. Load regulation: the measured output load from 0 to 100% load change measured.
Rated Product
Company Information
Packaging & Shipping
Payment&Shipping
Payment
We accept T/T, L/C,or Western Union,if you have any
problems about payment,please contact us
Shipping
15-20 days after sample approval and deposit received.
Tracking No. will be sent to you after delivery and you
will get every important shipping status by email
FAQ
Q1. Can I have a sample order for power supply?
A1: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2: Do you accept OEM/ODM for the switching power supply ?
A2: Yes. we do.
Q3:How about the quality?
A3:We have the better professional and experienced engineers team and strict QA and QC system.Repair rate under 0.1%~0.2%
Q4:What is PFC?
A4:PFC stands for Power Factor Correction. The purpose of PFC is to improve the ratio of apparent power and real power. The power factor is only 0.5~0.7 in non-PFC models. In PFC models, the power factor can reach above 0.9. The calculation formulas are as below:
Apparent Power=Input Voltage x Input Current (VA)
Real Power= Input Voltage x Input Current x Power Factor (W)