wastewater sludge energy technology power plant generate electricity

Product Description
Product Application
MSW gasifier is basically conversion of solid fuels (wood/ wood-waste, agricultural residues etc.) into a combustible gas mixture normally called Producer Gas. The process is typically used for various biomass materials and it involves partial combustion of such biomass Partial combustion process occurs when air supply (O2) is less than adequate for the complete combustion of biomass.
Biomass gasifier can be used to supply heat source for steam boiler, hot water boiler, thermal oil heater, aluminum melting furnace, rotary dryer, industrial furnace, drying kiln system, etc. Also can connect with generator to produce electricity.
SPECIFICATIONS FOR MSW GASIFIER OF 400KW PLANT



Gasifier body
Gasifier model
-
HQ-LX2400
Specification
mm
Dia.2400 x 9000 H
Material
grade
Boiler steel 16Mn


Main performance parameters

Capacity
kcal
2,400,000
Gas produced
m3
1600-1800
Biomass consumption
kg
700-800

Gas parameters
Components
%
CO: 20-25%, H2: 8-15%, CH4:2-4%, CO2:2-4%, N2: 40-45%
Heating value
kcal
1100-1300
Gasification effiency
%
>75
Main Features
1.The gasifier uses fixed bed down-draft type, produce syngas continously and stably with low tar content.

2.Easy to use and operate, use Siemens PLC touch screen control panel to realize automatic control and semi-automatic control. Independent operation room, adjust parameter directly by controlling LCD touch screen.3.Due to MSW gasification process adopts pyrolysis and accurate control in different stage, so it can reach specified flue gas standard.4.Due to low temperature gasification combustion(gasifier furnace) under anaerobic condition and low temperature gasifier and combustion, only producing combustible gas, particulate matter emission is precious little. 5.Finish low temperature oxidation process in high temperature combustion chamber (combustion furnace), not producing harmful gas secondary pollution.

6.Due to combustion process is complete, the ash is completely non- pollution matter.7.The removal rate of organic is over 90%, so it reduce the follow-up treatment cost greatly.8.All kinds of waste with different composition can burn stably at the same time.9.Safety separation combustion, restrict dioxin and other harmful matter output. 10.Operation 24 hours/day continuous.11. Waste need to sort out, and improved operation efficency, ensure the safety of working environment. 12.Haiqi gasification system is fully closed, it is neat and beautiful look at site, no harmful to operation people. Automatic fuzzy control, easy to operate. All fuel feeding, slag discharge door, overhaul hole use soft seal, On the top of furnace has a seal cover to avoid gas leakage. The sealing of furnace is good, realizing good effect of oxygen controlling and pyrolysis. 13.When pyrolysis gas spontaneous combustion take place, then it enter into a process of spontaneous combustion, auxiliary combustion device will stop automatically. The whole process of spontaneous combustion is over 90%, greatly lower running cost. Realized resource utilization of waste thermal energy. Flue gas emission is no harmful and total CO2 emission is reduced.

Certifications
Detailed Images
Machine Parts
Name: Gasifier furnace
Brand: Haiqi
Original: China
Quality boiler steel 16Mn, two-layer steel plate for inside and outside furnace, water cooling jacket, hydraulic grate, automatic feeding and ash discharging. 24 hours continous running.
Main Features
Name: Gas purification system
Brand: Haiqi
Original: China
Consist of water spraying, condenser, water seal, cyclone. Remove dust, vapor, and tar at the maximum, reduce temperature of gas.

Machine Parts
Name: Ash discharging system
Brand: Haiqi
Original: China
Screw discharging, timing automatical control, wet or dry type ash discharging.

Main Features
Name: Syngas generator set 400kw
Brand: Haiqi
Original: China
Special designed for syngas, low speed RPM and large diameter cylinder engine to guarantee its working stable and continous.
Our Service
Pre-Sales Service
* Inquiry and consulting support.
* Design drawing and paper prepared
* View our Factory.
After-Sales Service

* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
Packing & Delivery
Packaging
Size
3.6*3.6*8m
Weight
20T






Packaging Details
Naked packing then put in 40'FR container for furnace body.


Small parts put in 40'HQ container


Control panel is packed in wooden box
Packaging
Size
irregulated
Weight
10-20 T






Packaging Details
Naked packing then put in 40'FR container for furnace body.Small parts put in 40'HQ containerControl panel is packed in wooden box.
Related Products
Biomass pellet burner
94.8% Response Rate
Sawdust burner
91.2% Response Rate
Biomass & msw gasifier
96.5% Response Rate
Contact Us